Used Toyota Sienna intake manifold from a salvage yard

Vehicle-specific price guide

How much is a used Toyota Sienna intake manifold?

Asking prices from 222 salvage yards in 42 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 21, 2026
Strong coverage435 priced of 578 observed2 variantsMethodology v2.1 →

Part overview

About the Toyota Sienna intake manifold

What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →

Also known asInlet Manifold
Price summary

A used Toyota Sienna intake manifold costs $49 to $530, with a median asking price of $236. Based on 435 priced salvage yard listings across the US, compatible across 2010–2025 (16 model years), updated Oct 21, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$236
Grade B (good)$236
Grade C (fair)$100

Toyota Sienna intake manifold price snapshot

USD
Low
$49
Average
$216
High
$530
578 listings observed · 435 priced11d ago· How we price·

Report incorrect price

Reporting price for Toyota Sienna Intake Manifold

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$49–$530298 listings
Grade BStandard used$75–$38751 listings
Grade CVisible wear$50–$15011 listings
Grade XUngraded$49–$49575 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $49–$530 overall range

Regional supply

Where the Toyota Sienna intake manifold is listed

We found priced Toyota Sienna intake manifold listings at 222 salvage yards across 42 states. California supplies the most, with 202 listings (29% of the total) from 35 yards. Location matters: yards in Indiana ask a median $125, while Arizona yards ask $250, 100% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California20235$236
Texas517$241+2%
Colorado333$236
Arizona315$250+6%
Michigan2510$235
Indiana248$125-47%
Florida2113$200-15%
Missouri204$182-23%

States with at least 10 priced listings. % is versus the $236 national median.

Replacement cost

What is the Toyota Sienna intake manifold replacement cost?

ESTIMATE
Used part
$236
Toyota Sienna median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$425–$985
median used part + labor

Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Toyota Sienna Intake Manifold

$

Current avg: $216 — we suggest $184 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2020)

(3.5L, 2GRFKS engine), upper46 listingsInterchange 2017–2022$270$64 – $530
(3.5L, 2GRFKS engine), lower45 listingsInterchange 2017–2020$190$49 – $340

Model-year comparison

What does a Toyota Sienna intake manifold cost by year?

$68$116$165$214$2632015201620182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Toyota Sienna intake manifold cost?

Asking prices for a used Toyota Sienna intake manifold are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 136% premium over grade-C stock, with grade-A medians at $236.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, (3.5L, 2GRFKS engine), lower, lists at a $190 median, while (3.5L, 2GRFKS engine), upper commands $270, a 42% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2016 units carry the lowest median at $75, while 2021 tops the table at $250. Parts from 2015–2016 are interchangeable, so if the 2016 fits your vehicle, it offers the best value across 2 compatible years.

Against comparable vehicles, the Toyota Sienna sits 30% above the Mercedes S Class ($181), level with the Ram 3500 ($235), and 87% above the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used intake manifold: what to check

  1. Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
  2. Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
  3. Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
  4. Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
  5. Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.

Keep browsing this vehicle

What other Toyota Sienna parts are priced?

Price comparisons

Compare Toyota Sienna intake manifold prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Toyota Sienna intake manifold FAQ

How much is a used intake manifold for a Toyota Sienna?

The median asking price is $236 across 435 priced listings from 222 yards. Grade-A units, the cleanest stock, have a median of $236. 2016 is the cheapest model year we track, with a median of $75.

How much does it cost to replace a Toyota Sienna intake manifold?

Using a used part, a Toyota Sienna intake manifold replacement typically runs $425–$985 all-in: the median used intake manifold for this model lists at $236, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.

Which Toyota Sienna model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Toyota Sienna intake manifold years are interchangeable?

Salvage-yard interchange data links Toyota Sienna intake manifold fitments across 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 16 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Toyota Sienna Intake Manifold Cost — From $49 to $530