Chrysler Pacifica steering column price snapshot
- Low
- $50
- Average
- $179
- High
- $420
Vehicle-specific price guide
How much is a used Chrysler Pacifica steering column?
Asking prices from 159 salvage yards in 18 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 24, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Chrysler Pacifica steering column
What the steering column does, common failure signs, and prices across all vehicles: used steering column price guide →
Price summary
A used Chrysler Pacifica steering column costs $50 to $420, with a median asking price of $159. Based on 1,580 priced salvage yard listings across the US, compatible across 2017–2025 (9 model years), updated Sep 24, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$166
Grade B (good)$171
Grade C (fair)$100
USD
Condition comparison
Price by part grade
Grade AClean / low wear$50–$414634 listings
Grade BStandard used$51–$420849 listings
Grade CVisible wear$95–$1299 listings
Grade XUngraded$70–$20088 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $50–$414 | 634 | |
| Grade BStandard used | $51–$420 | 849 | |
| Grade CVisible wear | $95–$129 | 9 | |
| Grade XUngraded | $70–$200 | 88 |
Median by grade
Grade price comparison
Grade A$166
Grade B$171
Grade C$100
Ungraded$100
Median asking price by seller-reported condition grade · $50–$420 overall range
Regional supply
Where the Chrysler Pacifica steering column is listed
We found priced Chrysler Pacifica steering column listings at 159 salvage yards across 18 states. Texas supplies the most, with 468 listings (30% of the total) from 36 yards. Location matters: yards in Utah ask a median $100, while Illinois yards ask $194, 94% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Texas | 468 | 36 | $173+9% |
| Florida | 381 | 30 | $150-6% |
| Arizona | 212 | 11 | $138-13% |
| California | 152 | 19 | $101-36% |
| Illinois | 143 | 14 | $194+22% |
| Nevada | 50 | 3 | $141-11% |
| Utah | 45 | 7 | $100-37% |
| Colorado | 35 | 5 | $182+14% |
States with at least 10 priced listings. % is versus the $159 national median.
Replacement cost
What is the Chrysler Pacifica steering column replacement cost?
- Used part
- $159
- Chrysler Pacifica median asking price
- Labor
- $190–$750
- 2–5 hours at $95–$150/hr
- Estimated total
- $350–$910
- median used part + labor
Labor is a typical independent-shop range for steering column replacement, not a quote for your vehicle; it does not include steering wheel and dashboard panel removal and reassembly. The part price is the live median from the salvage-yard listings on this page. Full steering column replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Chrysler Pacifica steering column cost by year?
2025200 listingsFits 9 years$135$51 – $4202024200 listingsFits 8 years$159$71 – $4102023200 listingsFits 8 years$194$50 – $4132022200 listingsFits 9 years$137$51 – $4202021200 listingsFits 8 years$136$51 – $4202020200 listingsFits 8 years$173$50 – $4202019133 listingsFits 8 years$201$66 – $3452018200 listingsFits 9 years$150$71 – $4102017200 listingsFits 8 years$173$50 – $420
Market analysis
How much does a used Chrysler Pacifica steering column cost?
Asking prices for a used Chrysler Pacifica steering column are unusually spread out: the top listing asks about 8 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 66% premium over grade-C stock, with grade-A medians at $166.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, w/o heated steering wheel; adaptive cruise, lists at a $101 median, while heated steering wheel, w/o adaptive cruise commands $150, a 49% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2025 units carry the lowest median at $135, while 2019 tops the table at $201. Parts from 2017–2024 are interchangeable, so if the 2025 fits your vehicle, it offers the best value across 8 compatible years.
Against comparable vehicles, the Chrysler Pacifica sits 10% above the Subaru Impreza ($145), 27% above the Subaru Outback ($125), and 10% above the Honda Civic ($145) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used steering column: what to check
- Inspect intermediate shaft u-joint splines: Check lower universal joints for play, binding, or stripped pinch-bolt splines where the column meets the rack.
- Verify electric power steering motor inclusion: Ask if columns with integrated electric assist include the assist motor, reduction gear, and module assembly.
- Check tilt and telescoping locking lever: Test manual tilt and telescoping levers to ensure column lock shoes clamp tightly without slipping under load.
- Confirm ignition switch and clockspring wiring: Match multi-function switch stalk plugs, clockspring connectors, and key tumbler housings to your vehicle.
- Lock steering wheel straight before installation: Lock steering wheel alignment straight before installation to prevent over-rotating and snapping internal clockspring wires.
Keep browsing this vehicle
What other Chrysler Pacifica parts are priced?
01wide ±224%
Transmission Control Module
$116median
$25$545
02wide ±175%
Side Mirror
$232median
$50$860
03wide ±137%
Front Seat
$175median
$50$528
04wide ±184%
Car Radio
$190median
$49$750
05wide ±148%
Strut
$96median
$36$320
06wide ±285%
Air Bag
$143median
$35$850
07wide ±125%
Headlight Assembly
$424median
$110$1,170
08wide ±163%
Wheels
$192median
$45$670
09wide ±249%
Tail Light
$150median
$25$773
10wide ±154%
Rear Bumper Assembly
$482median
$125$1,606
11wide ±146%
Grille
$167median
$38$524
12wide ±204%
Axle Shaft
$136median
$40$594
Price comparisons
Compare Chrysler Pacifica steering column prices
Steering Columncompare
SubaruImprezavsChryslerPacifica
Impreza$145
Pacifica$159
$14 diff7,037 listings
Steering ColumncompareSubaruOutbackvsChryslerPacifica
Outback$125
Pacifica$159
$34 diff6,820 listings
Steering ColumncompareHondaCivicvsChryslerPacifica
Civic$145
Pacifica$159
$14 diff6,430 listings
Steering ColumncompareToyotaPriusvsChryslerPacifica
Prius$111
Pacifica$159
$48 diff6,168 listings
Steering ColumncompareMercedesGLEClassvsChryslerPacifica
Class$210
Pacifica$159
$51 diff5,969 listings
Steering ColumncompareMercedesSClassvsChryslerPacifica
Class$225
Pacifica$159
$66 diff5,670 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±99%
Acura ILX
$106median
$55$265
Acurawide ±97%
Acura Integra
$188median
$85$449
Acurawide ±126%
Acura MDX
$151median
$75$455
Acurawide ±139%
Acura RDX
$156median
$60$493
Acurawide ±117%
Acura TLX
$150median
$40$391
Audiwide ±178%
Audi A4
$156median
$45$599
Audiwide ±179%
Audi A6
$146median
$50$574
Audiwide ±92%
Audi Q3
$228median
$75$493
Audiwide ±142%
Audi Q5
$167median
$45$520
Audiwide ±240%
Audi Q7
$203median
$50$1,024
Chryslerwide ±108%
Chrysler 300
$176median
$40$420
Chryslerwide ±93%
Chrysler Voyager
$194median
$51$413
Common questions
Chrysler Pacifica steering column FAQ
How much is a used steering column for a Chrysler Pacifica?
The median asking price is $159 across 1,580 priced listings from 159 yards. Grade-A units, the cleanest stock, have a median of $166. 2025 is the cheapest model year we track, with a median of $135.
How much does it cost to replace a Chrysler Pacifica steering column?
Using a used part, a Chrysler Pacifica steering column replacement typically runs $350–$910 all-in: the median used steering column for this model lists at $159, and independent-shop labor for steering column replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include steering wheel and dashboard panel removal and reassembly. Labor is a national part-level estimate, not a quote for your vehicle.
Which Chrysler Pacifica model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Chrysler Pacifica steering column years are interchangeable?
Salvage-yard interchange data links Chrysler Pacifica steering column fitments across 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 9 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.