GMC Canyon steering column price snapshot
- Low
- $45
- Average
- $178
- High
- $543
Vehicle-specific price guide
How much is a used GMC Canyon steering column?
Asking prices from 405 salvage yards in 47 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 21, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the GMC Canyon steering column
What the steering column does, common failure signs, and prices across all vehicles: used steering column price guide →
Price summary
A used GMC Canyon steering column costs $45 to $543, with a median asking price of $170. Based on 1,134 priced salvage yard listings across the US, compatible across 2015–2026 (12 model years), updated Oct 21, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$170
Grade B (good)$193
Grade C (fair)$110
USD
Condition comparison
Price by part grade
Grade AClean / low wear$50–$543825 listings
Grade BStandard used$50–$543245 listings
Grade CVisible wear$110–$2405 listings
Grade XUngraded$45–$25059 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $50–$543 | 825 | |
| Grade BStandard used | $50–$543 | 245 | |
| Grade CVisible wear | $110–$240 | 5 | |
| Grade XUngraded | $45–$250 | 59 |
Median by grade
Grade price comparison
Grade A$170
Grade B$193
Grade C$110
Ungraded$100
Median asking price by seller-reported condition grade · $45–$543 overall range
Regional supply
Where the GMC Canyon steering column is listed
We found priced GMC Canyon steering column listings at 405 salvage yards across 47 states. Florida supplies the most, with 174 listings (11% of the total) from 23 yards. Location matters: yards in California ask a median $100, while Illinois yards ask $219, 119% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Florida | 174 | 23 | $206+21% |
| California | 155 | 28 | $100-41% |
| Illinois | 124 | 20 | $219+29% |
| Texas | 120 | 31 | $160-6% |
| Colorado | 90 | 9 | $174+2% |
| Georgia | 75 | 12 | $200+18% |
| North Carolina | 75 | 20 | $202+19% |
| Arizona | 73 | 9 | $110-35% |
States with at least 10 priced listings. % is versus the $170 national median.
Replacement cost
What is the GMC Canyon steering column replacement cost?
- Used part
- $170
- GMC Canyon median asking price
- Labor
- $190–$750
- 2–5 hours at $95–$150/hr
- Estimated total
- $360–$920
- median used part + labor
Labor is a typical independent-shop range for steering column replacement, not a quote for your vehicle; it does not include steering wheel and dashboard panel removal and reassembly. The part price is the live median from the salvage-yard listings on this page. Full steering column replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a GMC Canyon steering column cost by year?
202544 listings$185$75 – $3842024100 listingsFits 4 years$151$75 – $4452023100 listingsFits 3 years$150$75 – $3552022142 listingsFits 8 years$149$45 – $5432021150 listingsFits 8 years$125$60 – $4502020141 listingsFits 8 years$148$45 – $5432019150 listingsFits 8 years$198$61 – $4132018150 listingsFits 8 years$183$61 – $355201781 listingsFits 8 years$184$50 – $4202016106 listingsFits 8 years$206$61 – $341201575 listingsFits 8 years$195$61 – $413
Market analysis
How much does a used GMC Canyon steering column cost?
Asking prices for a used GMC Canyon steering column are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 55% premium over grade-C stock, with grade-A medians at $170.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, Non-Interchange search using GMC Truck-Canyon and similar models, lists at a $175 median, while Non-Interchange search using only GMC Truck-Canyon commands $225, a 29% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2021 units carry the lowest median at $125, while 2016 tops the table at $206. Parts from 2015–2022 are interchangeable, so if the 2021 fits your vehicle, it offers the best value across 8 compatible years.
Against comparable vehicles, the GMC Canyon sits 17% above the Subaru Impreza ($145), 36% above the Subaru Outback ($125), and 17% above the Honda Civic ($145) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used steering column: what to check
- Inspect intermediate shaft u-joint splines: Check lower universal joints for play, binding, or stripped pinch-bolt splines where the column meets the rack.
- Verify electric power steering motor inclusion: Ask if columns with integrated electric assist include the assist motor, reduction gear, and module assembly.
- Check tilt and telescoping locking lever: Test manual tilt and telescoping levers to ensure column lock shoes clamp tightly without slipping under load.
- Confirm ignition switch and clockspring wiring: Match multi-function switch stalk plugs, clockspring connectors, and key tumbler housings to your vehicle.
- Lock steering wheel straight before installation: Lock steering wheel alignment straight before installation to prevent over-rotating and snapping internal clockspring wires.
Keep browsing this vehicle
What other GMC Canyon parts are priced?
01wide ±198%
Transmission Control Module
$106median
$20$440
02wide ±290%
Car Radio
$120median
$25$722
03wide ±174%
Front Seat
$211median
$61$795
04wide ±214%
Air Bag
$223median
$45$1,000
05wide ±120%
Drive Shaft
$191median
$60$520
06wide ±201%
Wheels
$200median
$47$850
07wide ±156%
Side Mirror
$186median
$41$620
08wide ±115%
Transmission
$1,975median
$544$5,087
09wide ±79%
Quarter Panel
$606median
$266$1,225
10wide ±146%
Center Console
$159median
$35$500
11wide ±132%
AC Condenser
$159median
$40$460
12wide ±265%
Fuel Pump
$118median
$25$650
Price comparisons
Compare GMC Canyon steering column prices
Steering Columncompare
SubaruImprezavsGMCCanyon
Impreza$145
Canyon$170
$25 diff6,591 listings
Steering ColumncompareSubaruOutbackvsGMCCanyon
Outback$125
Canyon$170
$45 diff6,374 listings
Steering ColumncompareHondaCivicvsGMCCanyon
Civic$145
Canyon$170
$25 diff5,984 listings
Steering ColumncompareToyotaPriusvsGMCCanyon
Prius$111
Canyon$170
$59 diff5,722 listings
Steering ColumncompareMercedesGLEClassvsGMCCanyon
Class$210
Canyon$170
$40 diff5,523 listings
Steering ColumncompareMercedesSClassvsGMCCanyon
Class$225
Canyon$170
$55 diff5,224 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±99%
Acura ILX
$106median
$55$265
Acurawide ±97%
Acura Integra
$188median
$85$449
Acurawide ±126%
Acura MDX
$151median
$75$455
Acurawide ±139%
Acura RDX
$156median
$60$493
Acurawide ±117%
Acura TLX
$150median
$40$391
Audiwide ±178%
Audi A4
$156median
$45$599
Audiwide ±179%
Audi A6
$146median
$50$574
Audiwide ±92%
Audi Q3
$228median
$75$493
GMCwide ±128%
GMC Acadia
$154median
$50$445
GMCwide ±112%
GMC Sierra 1500
$201median
$50$500
GMCwide ±113%
GMC Terrain
$168median
$35$413
GMCwide ±113%
GMC Yukon
$200median
$50$500
Common questions
GMC Canyon steering column FAQ
How much is a used steering column for a GMC Canyon?
The median asking price is $170 across 1,134 priced listings from 405 yards. Grade-A units, the cleanest stock, have a median of $170. 2021 is the cheapest model year we track, with a median of $125.
How much does it cost to replace a GMC Canyon steering column?
Using a used part, a GMC Canyon steering column replacement typically runs $360–$920 all-in: the median used steering column for this model lists at $170, and independent-shop labor for steering column replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include steering wheel and dashboard panel removal and reassembly. Labor is a national part-level estimate, not a quote for your vehicle.
Which GMC Canyon model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which GMC Canyon steering column years are interchangeable?
Salvage-yard interchange data links GMC Canyon steering column fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 12 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.