GMC Yukon steering column price snapshot
- Low
- $50
- Average
- $208
- High
- $500
Vehicle-specific price guide
How much is a used GMC Yukon steering column?
Asking prices from 270 salvage yards in 37 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 21, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the GMC Yukon steering column
What the steering column does, common failure signs, and prices across all vehicles: used steering column price guide →
Price summary
A used GMC Yukon steering column costs $50 to $500, with a median asking price of $200. Based on 1,155 priced salvage yard listings across the US, compatible across 2014–2026 (13 model years), updated Oct 21, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$206
Grade B (good)$210
Grade C (fair)$100
USD
Condition comparison
Price by part grade
Grade AClean / low wear$50–$444767 listings
Grade BStandard used$51–$420288 listings
Grade CVisible wear$85–$1006 listings
Grade XUngraded$60–$50094 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $50–$444 | 767 | |
| Grade BStandard used | $51–$420 | 288 | |
| Grade CVisible wear | $85–$100 | 6 | |
| Grade XUngraded | $60–$500 | 94 |
Median by grade
Grade price comparison
Grade A$206
Grade B$210
Grade C$100
Ungraded$200
Median asking price by seller-reported condition grade · $50–$500 overall range
Regional supply
Where the GMC Yukon steering column is listed
We found priced GMC Yukon steering column listings at 270 salvage yards across 37 states. Illinois supplies the most, with 234 listings (14% of the total) from 17 yards. Location matters: yards in Florida ask a median $135, while Illinois yards ask $287, 113% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Illinois | 234 | 17 | $287+44% |
| California | 210 | 34 | $150-25% |
| Texas | 173 | 29 | $193-4% |
| Arizona | 152 | 10 | $159-20% |
| Florida | 135 | 27 | $135-32% |
| Colorado | 98 | 6 | $184-8% |
| Missouri | 84 | 8 | $212+6% |
| Georgia | 74 | 13 | $145-28% |
States with at least 10 priced listings. % is versus the $200 national median.
Replacement cost
What is the GMC Yukon steering column replacement cost?
- Used part
- $200
- GMC Yukon median asking price
- Labor
- $190–$750
- 2–5 hours at $95–$150/hr
- Estimated total
- $390–$950
- median used part + labor
Labor is a typical independent-shop range for steering column replacement, not a quote for your vehicle; it does not include steering wheel and dashboard panel removal and reassembly. The part price is the live median from the salvage-yard listings on this page. Full steering column replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a GMC Yukon steering column cost by year?
2025100 listingsFits 6 years$207$85 – $4202024100 listingsFits 6 years$170$80 – $3352023187 listingsFits 5 years$196$50 – $4442022100 listingsFits 5 years$235$50 – $4132021100 listingsFits 6 years$207$85 – $420202079 listingsFits 6 years$150$56 – $350201976 listingsFits 6 years$287$51 – $413201895 listingsFits 7 years$125$75 – $4102017150 listingsFits 7 years$287$51 – $4132016150 listingsFits 7 years$159$75 – $3652015150 listingsFits 7 years$200$100 – $500
Market analysis
How much does a used GMC Yukon steering column cost?
Asking prices for a used GMC Yukon steering column are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 106% premium over grade-C stock, with grade-A medians at $206.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, (column shift), manual tilt and telescopic (opt N37), lists at a $125 median, while (column shift), power tilt and telescopic (opt N38) commands $244, a 95% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2018 units carry the lowest median at $125, while 2017 tops the table at $287. Parts from 2014–2020 are interchangeable, so if the 2018 fits your vehicle, it offers the best value across 7 compatible years.
Against comparable vehicles, the GMC Yukon sits 38% above the Subaru Impreza ($145), 60% above the Subaru Outback ($125), and 38% above the Honda Civic ($145) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used steering column: what to check
- Inspect intermediate shaft u-joint splines: Check lower universal joints for play, binding, or stripped pinch-bolt splines where the column meets the rack.
- Verify electric power steering motor inclusion: Ask if columns with integrated electric assist include the assist motor, reduction gear, and module assembly.
- Check tilt and telescoping locking lever: Test manual tilt and telescoping levers to ensure column lock shoes clamp tightly without slipping under load.
- Confirm ignition switch and clockspring wiring: Match multi-function switch stalk plugs, clockspring connectors, and key tumbler housings to your vehicle.
- Lock steering wheel straight before installation: Lock steering wheel alignment straight before installation to prevent over-rotating and snapping internal clockspring wires.
Keep browsing this vehicle
What other GMC Yukon parts are priced?
01wide ±197%
Wheels
$300median
$67$1,250
02wide ±162%
Side Mirror
$229median
$50$794
03wide ±262%
Transfer Case
$287median
$61$1,563
04wide ±78%
Transmission
$2,595median
$1,295$5,342
05wide ±231%
Strut
$265median
$50$1,272
06wide ±152%
Radiator
$233median
$70$779
07wide ±66%
Headlight Assembly
$750median
$282$1,268
08wide ±161%
Grille
$350median
$65$1,195
09wide ±106%
Alternator
$136median
$35$323
10wide ±120%
Starter
$113median
$35$306
11wide ±151%
Axle Shaft
$150median
$40$493
12wide ±124%
Tail Light
$308median
$59$822
Price comparisons
Compare GMC Yukon steering column prices
Steering Columncompare
SubaruOutbackvsGMCYukon
Outback$125
Yukon$200
$75 diff6,395 listings
Steering ColumncompareToyotaPriusvsGMCYukon
Prius$111
Yukon$200
$89 diff5,743 listings
Steering ColumncompareMercedesGLEClassvsGMCYukon
Class$210
Yukon$200
$10 diff5,544 listings
Steering ColumncompareMercedesSClassvsGMCYukon
Class$225
Yukon$200
$25 diff5,245 listings
Steering ColumncompareToyotaRAV4vsGMCYukon
RAV4$170
Yukon$200
$30 diff5,236 listings
Steering ColumncompareFordF250vsGMCYukon
F250$258
Yukon$200
$58 diff5,129 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±99%
Acura ILX
$106median
$55$265
Acurawide ±97%
Acura Integra
$188median
$85$449
Acurawide ±126%
Acura MDX
$151median
$75$455
Acurawide ±139%
Acura RDX
$156median
$60$493
Acurawide ±117%
Acura TLX
$150median
$40$391
Audiwide ±178%
Audi A4
$156median
$45$599
Audiwide ±179%
Audi A6
$146median
$50$574
Audiwide ±92%
Audi Q3
$228median
$75$493
GMCwide ±128%
GMC Acadia
$154median
$50$445
GMCwide ±146%
GMC Canyon
$170median
$45$543
GMCwide ±112%
GMC Sierra 1500
$201median
$50$500
GMCwide ±113%
GMC Terrain
$168median
$35$413
Common questions
GMC Yukon steering column FAQ
How much is a used steering column for a GMC Yukon?
The median asking price is $200 across 1,155 priced listings from 270 yards. Grade-A units, the cleanest stock, have a median of $206. 2018 is the cheapest model year we track, with a median of $125.
How much does it cost to replace a GMC Yukon steering column?
Using a used part, a GMC Yukon steering column replacement typically runs $390–$950 all-in: the median used steering column for this model lists at $200, and independent-shop labor for steering column replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include steering wheel and dashboard panel removal and reassembly. Labor is a national part-level estimate, not a quote for your vehicle.
Which GMC Yukon model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which GMC Yukon steering column years are interchangeable?
Salvage-yard interchange data links GMC Yukon steering column fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.