Used Chevy Suburban torque converter from a salvage yard

Vehicle-specific price guide

How much is a used Chevy Suburban torque converter?

Salvage yard asking prices broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 24, 2026
Limited coverage2 priced of 62 observed1 variantMethodology v2.1 →

Part overview

About the Chevy Suburban torque converter

What the torque converter does, common failure signs, and prices across all vehicles: used torque converter price guide →

Also known asTransmission Torque ConverterTorque Convertor

Request price data

Requesting data for Chevy Suburban torque converter

We'll notify you when the data is live. No spam.

Price summary

A used Chevy Suburban torque converter costs $450 to $450, with a median asking price of $450. Based on 2 priced salvage yard listings across the US, compatible across 2014–2021 (8 model years), updated Sep 24, 2026. Prices exclude shipping, core charges, and installation.

Chevy Suburban torque converter price snapshot

USD
Low
$450
Average
$450
High
$450
62 listings observed · 2 priced1mo ago· How we price·

Report incorrect price

Reporting price for Chevy Suburban Torque Converter

Reason

Replacement cost

What is the Chevy Suburban torque converter replacement cost?

ESTIMATE
Used part
$450
Chevy Suburban median asking price
Labor
$475–$1,500
5–10 hours at $95–$150/hr
Estimated total
$925–$1,950
median used part + labor

Labor is a typical independent-shop range for torque converter replacement, not a quote for your vehicle; it does not include transmission fluid and filter, since the transmission must be removed to access the converter. The part price is the live median from the salvage-yard listings on this page. Full torque converter replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Chevy Suburban Torque Converter

$

Current avg: $450 — we suggest $383 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2020)

6.2L; Premier; (8-376)

1 listings
$450$450 – $450

Model-year comparison

What does a Chevy Suburban torque converter cost by year?

Market analysis

How much does a used Chevy Suburban torque converter cost?

Asking prices for a used Chevy Suburban torque converter sit in a fairly tight band around the $450 median, so most quotes far outside it deserve a second look.

Against comparable vehicles, the Chevy Suburban sits 105% above the Jeep Compass ($219), 109% above the Jeep Cherokee ($215), and 84% above the Volkswagen Atlas ($244) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used torque converter: what to check

  1. Inspect hub neck snout and drive notch: Check the small transmission pump drive neck for deep grooves, burrs, or rounded drive blade notches.
  2. Verify internal stator one-way clutch operation: Insert a spline tool into the stator hub to confirm it locks firmly in one direction and spins freely in the other.
  3. Check starter ring gear tooth condition: Examine outer perimeter ring gear teeth for chipped, rounded, or ground-down teeth caused by starter engagement failures.
  4. Confirm pilot hub diameter and bolt pattern: Measure pilot stub diameter and bolt circle spacing to match your engine crankshaft and flexplate layout.
  5. Fully seat converter splines before transmission bolting: Spin and push the converter until it drops past two distinct spline steps into the oil pump drive.

Keep browsing this vehicle

What other Chevy Suburban parts are priced?

Compare fitments

What do similar vehicles charge for this part?

Common questions

Chevy Suburban torque converter FAQ

How much is a used torque converter for a Chevy Suburban?

The median asking price is $450 across 2 priced listings. 2020 is the cheapest model year we track, with a median of $450.

How much does it cost to replace a Chevy Suburban torque converter?

Using a used part, a Chevy Suburban torque converter replacement typically runs $925–$1,950 all-in: the median used torque converter for this model lists at $450, and independent-shop labor for torque converter replacement typically takes 5–10 hours at $95–$150/hr ($475–$1,500). The labor figure does not include transmission fluid and filter, since the transmission must be removed to access the converter. Labor is a national part-level estimate, not a quote for your vehicle.

Which Chevy Suburban model years does this price guide cover?

This guide currently has year-level pricing for 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Chevy Suburban torque converter years are interchangeable?

Salvage-yard interchange data links Chevy Suburban torque converter fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021. Searching all 8 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Chevy Suburban Torque Converter Cost — From $450 to $450