Used Acura ILX torque converter from a salvage yard

Vehicle-specific price guide

How much is a used Acura ILX torque converter?

Asking prices from 6 salvage yards in 5 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 20, 2026
Limited coverage12 priced of 13 observed2 variantsMethodology v2.1 →

Part overview

About the Acura ILX torque converter

What the torque converter does, common failure signs, and prices across all vehicles: used torque converter price guide →

Also known asTransmission Torque ConverterTorque Convertor
Price summary

A used Acura ILX torque converter costs $90 to $340, with a median asking price of $305. Based on 12 priced salvage yard listings across the US, compatible across 2016–2018 (2 model years), updated Oct 20, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$305

Acura ILX torque converter price snapshot

USD
Low
$90
Average
$236
High
$340
13 listings observed · 12 priced8d ago· How we price·

Report incorrect price

Reporting price for Acura ILX Torque Converter

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$90–$34012 listings

Replacement cost

What is the Acura ILX torque converter replacement cost?

ESTIMATE
Used part
$305
Acura ILX median asking price
Labor
$475–$1,500
5–10 hours at $95–$150/hr
Estimated total
$780–$1,805
median used part + labor

Labor is a typical independent-shop range for torque converter replacement, not a quote for your vehicle; it does not include transmission fluid and filter, since the transmission must be removed to access the converter. The part price is the live median from the salvage-yard listings on this page. Full torque converter replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Acura ILX Torque Converter

$

Current avg: $236 — we suggest $201 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2018)

Other years20162015

Model-year comparison

What does a Acura ILX torque converter cost by year?

Market analysis

How much does a used Acura ILX torque converter cost?

Asking prices for a used Acura ILX torque converter are unusually spread out: the top listing asks about 4 times what the cheapest does, so which unit you pick matters more than the median.

Model year matters too: 2018 units carry the lowest median at $90, while 2016 tops the table at $305. Year-level pages linked in the table above break each one down by grade and variant.

Against comparable vehicles, the Acura ILX sits 39% above the Jeep Compass ($219), 42% above the Jeep Cherokee ($215), and 25% above the Volkswagen Atlas ($244) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used torque converter: what to check

  1. Inspect hub neck snout and drive notch: Check the small transmission pump drive neck for deep grooves, burrs, or rounded drive blade notches.
  2. Verify internal stator one-way clutch operation: Insert a spline tool into the stator hub to confirm it locks firmly in one direction and spins freely in the other.
  3. Check starter ring gear tooth condition: Examine outer perimeter ring gear teeth for chipped, rounded, or ground-down teeth caused by starter engagement failures.
  4. Confirm pilot hub diameter and bolt pattern: Measure pilot stub diameter and bolt circle spacing to match your engine crankshaft and flexplate layout.
  5. Fully seat converter splines before transmission bolting: Spin and push the converter until it drops past two distinct spline steps into the oil pump drive.

Keep browsing this vehicle

What other Acura ILX parts are priced?

Price comparisons

Compare Acura ILX torque converter prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Acura ILX torque converter FAQ

How much is a used torque converter for a Acura ILX?

The median asking price is $305 across 12 priced listings from 6 yards. Grade-A units, the cleanest stock, have a median of $305. 2018 is the cheapest model year we track, with a median of $90.

How much does it cost to replace a Acura ILX torque converter?

Using a used part, a Acura ILX torque converter replacement typically runs $780–$1,805 all-in: the median used torque converter for this model lists at $305, and independent-shop labor for torque converter replacement typically takes 5–10 hours at $95–$150/hr ($475–$1,500). The labor figure does not include transmission fluid and filter, since the transmission must be removed to access the converter. Labor is a national part-level estimate, not a quote for your vehicle.

Which Acura ILX model years does this price guide cover?

This guide currently has year-level pricing for 2018, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Acura ILX torque converter years are interchangeable?

Salvage-yard interchange data links Acura ILX torque converter fitments across 2016, 2018. Searching all 2 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Acura ILX Torque Converter Cost — From $90 to $340