Used Acura MDX torque converter from a salvage yard

Vehicle-specific price guide

How much is a used Acura MDX torque converter?

Asking prices from 10 salvage yards in 8 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 24, 2026
Moderate coverage38 priced of 92 observed0 variantsMethodology v2.1 →

Part overview

About the Acura MDX torque converter

What the torque converter does, common failure signs, and prices across all vehicles: used torque converter price guide →

Also known asTransmission Torque ConverterTorque Convertor
Price summary

A used Acura MDX torque converter costs $199 to $750, with a median asking price of $400. Based on 38 priced salvage yard listings across the US, compatible across 2013–2023 (9 model years), updated Sep 24, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$400

Acura MDX torque converter price snapshot

USD
Low
$199
Average
$403
High
$750
92 listings observed · 38 priced1mo ago· How we price·

Report incorrect price

Reporting price for Acura MDX Torque Converter

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$199–$75033 listings
Grade XUngraded$300–$3005 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $199–$750 overall range

Replacement cost

What is the Acura MDX torque converter replacement cost?

ESTIMATE
Used part
$400
Acura MDX median asking price
Labor
$475–$1,500
5–10 hours at $95–$150/hr
Estimated total
$875–$1,900
median used part + labor

Labor is a typical independent-shop range for torque converter replacement, not a quote for your vehicle; it does not include transmission fluid and filter, since the transmission must be removed to access the converter. The part price is the live median from the salvage-yard listings on this page. Full torque converter replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Acura MDX Torque Converter

$

Current avg: $403 — we suggest $343 (15% below)

Condition grade (optional)

Model-year comparison

What does a Acura MDX torque converter cost by year?

$359$466$573$680$788201520162017201820192020
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Acura MDX torque converter cost?

Asking prices for a used Acura MDX torque converter are unusually spread out: the top listing asks about 4 times what the cheapest does, so which unit you pick matters more than the median.

Model year matters too: 2017 units carry the lowest median at $399, while 2015 tops the table at $750. Parts from 2016–2023 are interchangeable, so if the 2017 fits your vehicle, it offers the best value across 5 compatible years.

Against comparable vehicles, the Acura MDX sits 83% above the Jeep Compass ($219), 86% above the Jeep Cherokee ($215), and 64% above the Volkswagen Atlas ($244) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used torque converter: what to check

  1. Inspect hub neck snout and drive notch: Check the small transmission pump drive neck for deep grooves, burrs, or rounded drive blade notches.
  2. Verify internal stator one-way clutch operation: Insert a spline tool into the stator hub to confirm it locks firmly in one direction and spins freely in the other.
  3. Check starter ring gear tooth condition: Examine outer perimeter ring gear teeth for chipped, rounded, or ground-down teeth caused by starter engagement failures.
  4. Confirm pilot hub diameter and bolt pattern: Measure pilot stub diameter and bolt circle spacing to match your engine crankshaft and flexplate layout.
  5. Fully seat converter splines before transmission bolting: Spin and push the converter until it drops past two distinct spline steps into the oil pump drive.

Keep browsing this vehicle

What other Acura MDX parts are priced?

Price comparisons

Compare Acura MDX torque converter prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Acura MDX torque converter FAQ

How much is a used torque converter for a Acura MDX?

The median asking price is $400 across 38 priced listings from 10 yards. Grade-A units, the cleanest stock, have a median of $400. 2019 is the cheapest model year we track, with a median of $399.

How much does it cost to replace a Acura MDX torque converter?

Using a used part, a Acura MDX torque converter replacement typically runs $875–$1,900 all-in: the median used torque converter for this model lists at $400, and independent-shop labor for torque converter replacement typically takes 5–10 hours at $95–$150/hr ($475–$1,500). The labor figure does not include transmission fluid and filter, since the transmission must be removed to access the converter. Labor is a national part-level estimate, not a quote for your vehicle.

Which Acura MDX model years does this price guide cover?

This guide currently has year-level pricing for 2024, 2023, 2022, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Acura MDX torque converter years are interchangeable?

Salvage-yard interchange data links Acura MDX torque converter fitments across 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2021, 2023. Searching all 9 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Acura MDX Torque Converter Cost — From $199 to $750