Chrysler Pacifica control arm price snapshot
- Low
- $30
- Average
- $135
- High
- $513
Vehicle-specific price guide
How much is a used Chrysler Pacifica control arm?
Asking prices from 179 salvage yards in 32 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 22, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Chrysler Pacifica control arm
What the control arm does, common failure signs, and prices across all vehicles: used control arm price guide →
Also known asLower Control ArmA-ArmWishbone
Price summary
A used Chrysler Pacifica control arm costs $30 to $513, with a median asking price of $116. Based on 1,076 priced salvage yard listings across the US, compatible across 2017–2025 (9 model years), updated Oct 22, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$126
Grade B (good)$111
Grade C (fair)$50
USD
Condition comparison
Price by part grade
Grade AClean / low wear$35–$460613 listings
Grade BStandard used$35–$513356 listings
Grade CVisible wear$50–$506 listings
Grade XUngraded$30–$200101 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $35–$460 | 613 | |
| Grade BStandard used | $35–$513 | 356 | |
| Grade CVisible wear | $50–$50 | 6 | |
| Grade XUngraded | $30–$200 | 101 |
Median by grade
Grade price comparison
Grade A$126
Grade B$111
Grade C$50
Ungraded$66
Median asking price by seller-reported condition grade · $30–$513 overall range
Regional supply
Where the Chrysler Pacifica control arm is listed
We found priced Chrysler Pacifica control arm listings at 179 salvage yards across 32 states. California supplies the most, with 232 listings (16% of the total) from 24 yards. Location matters: yards in California ask a median $75, while Illinois yards ask $170, 127% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| California | 232 | 24 | $75-35% |
| Indiana | 170 | 8 | $116 |
| Arizona | 112 | 9 | $82-29% |
| Florida | 107 | 15 | $125+8% |
| Illinois | 86 | 8 | $170+47% |
| Iowa | 84 | 9 | $156+34% |
| Michigan | 73 | 13 | $146+26% |
| Nevada | 67 | 2 | $106-9% |
States with at least 10 priced listings. % is versus the $116 national median.
Replacement cost
What is the Chrysler Pacifica control arm replacement cost?
- Used part
- $116
- Chrysler Pacifica median asking price
- Labor
- $95–$450
- 1–3 hours at $95–$150/hr
- Estimated total
- $210–$565
- median used part + labor
Labor is a typical independent-shop range for control arm replacement, not a quote for your vehicle; it does not include a wheel alignment after installation. The part price is the live median from the salvage-yard listings on this page. Full control arm replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Chrysler Pacifica control arm cost by year?
2025177 listingsFits 9 years$115$35 – $4602024175 listingsFits 8 years$116$50 – $4602023104 listingsFits 8 years$161$55 – $4602022175 listingsFits 8 years$115$35 – $4602021182 listingsFits 9 years$135$50 – $5132020177 listingsFits 8 years$116$50 – $4602019100 listingsFits 9 years$85$45 – $3202018100 listingsFits 7 years$75$30 – $2262017100 listingsFits 7 years$85$50 – $195
Market analysis
How much does a used Chrysler Pacifica control arm cost?
Asking prices for a used Chrysler Pacifica control arm are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 152% premium over grade-C stock, with grade-A medians at $126.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, FWD, LH, lists at a $82 median, while AWD, RH commands $184, a 124% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2018 units carry the lowest median at $75, while 2023 tops the table at $161. Parts from 2017–2023 are interchangeable, so if the 2018 fits your vehicle, it offers the best value across 7 compatible years.
Against comparable vehicles, the Chrysler Pacifica sits 40% below the Toyota 4Runner ($193), 36% below the Mercedes S Class ($180), and 16% above the Mercedes E Class ($100) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used control arm: what to check
- Inspect ball joint boot and stud play: Check for torn rubber dust boots, cracked grease seals, or lateral movement in the ball joint stud when flexed with a pry bar.
- Check rubber bushing integrity: Look for dry-rotted, torn, or fluid-leaking hydraulic suspension bushings where the arm mounts to the subframe.
- Verify structural straightness against factory specs: Compare the arm against original dimensions to spot subtle bends caused by curb strikes or suspension impacts.
- Confirm ball joint attachment design: Determine whether the arm uses a bolt-on ball joint or an integrated press-fit socket to anticipate future maintenance needs.
- Torque bushing bolts at ride height only: Tightening subframe pivot bolts while the vehicle is raised on jacks twists rubber bushings and causes premature tearing.
Keep browsing this vehicle
What other Chrysler Pacifica parts are priced?
01wide ±224%
Transmission Control Module
$116median
$25$545
02wide ±175%
Side Mirror
$232median
$50$860
03wide ±137%
Front Seat
$175median
$50$528
04wide ±184%
Car Radio
$190median
$49$750
05wide ±148%
Strut
$96median
$36$320
06wide ±285%
Air Bag
$143median
$35$850
07wide ±125%
Headlight Assembly
$424median
$110$1,170
08wide ±163%
Wheels
$192median
$45$670
09wide ±249%
Tail Light
$150median
$25$773
10wide ±154%
Rear Bumper Assembly
$482median
$125$1,606
11wide ±146%
Grille
$167median
$38$524
12wide ±204%
Axle Shaft
$136median
$40$594
Price comparisons
Compare Chrysler Pacifica control arm prices
Control Armcompare
Toyota4RunnervsChryslerPacifica
4Runner$193
Pacifica$116
$77 diff8,622 listings
Control ArmcompareMercedesSClassvsChryslerPacifica
Class$180
Pacifica$116
$64 diff7,786 listings
Control ArmcompareMercedesEClassvsChryslerPacifica
Class$100
Pacifica$116
$16 diff7,663 listings
Control ArmcompareFordMustangvsChryslerPacifica
Mustang$75
Pacifica$116
$41 diff7,631 listings
Control ArmcompareDodgeChargervsChryslerPacifica
Charger$75
Pacifica$116
$41 diff6,948 listings
Control ArmcompareMercedesCClassvsChryslerPacifica
Class$120
Pacifica$116
$4 diff6,865 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±105%
Acura ILX
$75median
$34$191
Acurawide ±151%
Acura Integra
$167median
$65$569
Acurawide ±162%
Acura MDX
$165median
$45$581
Acurawide ±127%
Acura RDX
$128median
$30$355
Acurawide ±232%
Acura TLX
$88median
$35$443
Audiwide ±179%
Audi A4
$85median
$35$339
Audiwide ±167%
Audi A6
$120median
$36$437
Audiwide ±98%
Audi Q3
$143median
$40$321
Audiwide ±205%
Audi Q5
$95median
$25$415
Audiwide ±243%
Audi Q7
$83median
$44$447
Chryslerwide ±150%
Chrysler 300
$80median
$30$270
Chryslerwide ±152%
Chrysler Voyager
$94median
$35$320
Common questions
Chrysler Pacifica control arm FAQ
How much is a used control arm for a Chrysler Pacifica?
The median asking price is $116 across 1,076 priced listings from 179 yards. Grade-A units, the cleanest stock, have a median of $126. 2018 is the cheapest model year we track, with a median of $75.
How much does it cost to replace a Chrysler Pacifica control arm?
Using a used part, a Chrysler Pacifica control arm replacement typically runs $210–$565 all-in: the median used control arm for this model lists at $116, and independent-shop labor for control arm replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include a wheel alignment after installation. Labor is a national part-level estimate, not a quote for your vehicle.
Which Chrysler Pacifica model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Chrysler Pacifica control arm years are interchangeable?
Salvage-yard interchange data links Chrysler Pacifica control arm fitments across 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 9 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.