GMC Canyon control arm price snapshot
- Low
- $35
- Average
- $137
- High
- $372
Vehicle-specific price guide
How much is a used GMC Canyon control arm?
Asking prices from 193 salvage yards in 34 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 23, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the GMC Canyon control arm
What the control arm does, common failure signs, and prices across all vehicles: used control arm price guide →
Also known asLower Control ArmA-ArmWishbone
Price summary
A used GMC Canyon control arm costs $35 to $372, with a median asking price of $116. Based on 1,054 priced salvage yard listings across the US, compatible across 2014–2026 (13 model years), updated Sep 23, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$132
Grade B (good)$121
Grade C (fair)$50
USD
Condition comparison
Price by part grade
Grade AClean / low wear$35–$372723 listings
Grade BStandard used$35–$321216 listings
Grade CVisible wear$50–$859 listings
Grade XUngraded$35–$200106 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $35–$372 | 723 | |
| Grade BStandard used | $35–$321 | 216 | |
| Grade CVisible wear | $50–$85 | 9 | |
| Grade XUngraded | $35–$200 | 106 |
Median by grade
Grade price comparison
Grade A$132
Grade B$121
Grade C$50
Ungraded$75
Median asking price by seller-reported condition grade · $35–$372 overall range
Regional supply
Where the GMC Canyon control arm is listed
We found priced GMC Canyon control arm listings at 193 salvage yards across 34 states. California supplies the most, with 176 listings (17% of the total) from 29 yards. Location matters: yards in California ask a median $86, while Nebraska yards ask $268, 212% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| California | 176 | 29 | $86-26% |
| Texas | 163 | 31 | $111-4% |
| Florida | 145 | 19 | $116 |
| Indiana | 66 | 4 | $116 |
| Nebraska | 59 | 4 | $268+131% |
| Wisconsin | 45 | 13 | $100-14% |
| Minnesota | 45 | 3 | $267+130% |
| Arizona | 45 | 11 | $90-22% |
States with at least 10 priced listings. % is versus the $116 national median.
Replacement cost
What is the GMC Canyon control arm replacement cost?
- Used part
- $116
- GMC Canyon median asking price
- Labor
- $95–$450
- 1–3 hours at $95–$150/hr
- Estimated total
- $210–$565
- median used part + labor
Labor is a typical independent-shop range for control arm replacement, not a quote for your vehicle; it does not include a wheel alignment after installation. The part price is the live median from the salvage-yard listings on this page. Full control arm replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a GMC Canyon control arm cost by year?
2025100 listings$267$75 – $297202423 listingsFits 4 years$195$75 – $372202324 listingsFits 3 years$165$50 – $2382022200 listingsFits 8 years$95$35 – $2752021192 listingsFits 8 years$116$50 – $2692020142 listingsFits 8 years$82$35 – $3212019135 listingsFits 8 years$96$35 – $2982018199 listingsFits 8 years$125$50 – $2982017300 listingsFits 7 years$125$40 – $1902016104 listingsFits 8 years$100$50 – $298201574 listingsFits 8 years$100$45 – $226
Market analysis
How much does a used GMC Canyon control arm cost?
Asking prices for a used GMC Canyon control arm are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 164% premium over grade-C stock, with grade-A medians at $132.
Model year matters too: 2020 units carry the lowest median at $82, while 2025 tops the table at $267. Parts from 2015–2022 are interchangeable, so if the 2020 fits your vehicle, it offers the best value across 8 compatible years.
Against comparable vehicles, the GMC Canyon sits 40% below the Toyota 4Runner ($193), 36% below the Mercedes S Class ($180), and 16% above the Mercedes E Class ($100) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used control arm: what to check
- Inspect ball joint boot and stud play: Check for torn rubber dust boots, cracked grease seals, or lateral movement in the ball joint stud when flexed with a pry bar.
- Check rubber bushing integrity: Look for dry-rotted, torn, or fluid-leaking hydraulic suspension bushings where the arm mounts to the subframe.
- Verify structural straightness against factory specs: Compare the arm against original dimensions to spot subtle bends caused by curb strikes or suspension impacts.
- Confirm ball joint attachment design: Determine whether the arm uses a bolt-on ball joint or an integrated press-fit socket to anticipate future maintenance needs.
- Torque bushing bolts at ride height only: Tightening subframe pivot bolts while the vehicle is raised on jacks twists rubber bushings and causes premature tearing.
Keep browsing this vehicle
What other GMC Canyon parts are priced?
01wide ±198%
Transmission Control Module
$106median
$20$440
02wide ±290%
Car Radio
$120median
$25$722
03wide ±174%
Front Seat
$211median
$61$795
04wide ±214%
Air Bag
$223median
$45$1,000
05wide ±120%
Drive Shaft
$191median
$60$520
06wide ±201%
Wheels
$200median
$47$850
07wide ±156%
Side Mirror
$186median
$41$620
08wide ±115%
Transmission
$1,975median
$544$5,087
09wide ±79%
Quarter Panel
$606median
$266$1,225
10wide ±146%
Center Console
$159median
$35$500
11wide ±132%
AC Condenser
$159median
$40$460
12wide ±265%
Fuel Pump
$118median
$25$650
Price comparisons
Compare GMC Canyon control arm prices
Control Armcompare
Toyota4RunnervsGMCCanyon
4Runner$193
Canyon$116
$77 diff8,600 listings
Control ArmcompareMercedesSClassvsGMCCanyon
Class$180
Canyon$116
$64 diff7,764 listings
Control ArmcompareMercedesEClassvsGMCCanyon
Class$100
Canyon$116
$16 diff7,641 listings
Control ArmcompareFordMustangvsGMCCanyon
Mustang$75
Canyon$116
$41 diff7,609 listings
Control ArmcompareDodgeChargervsGMCCanyon
Charger$75
Canyon$116
$41 diff6,926 listings
Control ArmcompareMercedesCClassvsGMCCanyon
Class$120
Canyon$116
$4 diff6,843 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±105%
Acura ILX
$75median
$34$191
Acurawide ±151%
Acura Integra
$167median
$65$569
Acurawide ±162%
Acura MDX
$165median
$45$581
Acurawide ±127%
Acura RDX
$128median
$30$355
Acurawide ±232%
Acura TLX
$88median
$35$443
Audiwide ±179%
Audi A4
$85median
$35$339
Audiwide ±167%
Audi A6
$120median
$36$437
Audiwide ±98%
Audi Q3
$143median
$40$321
GMCwide ±143%
GMC Acadia
$100median
$35$321
GMCwide ±99%
GMC Sierra 1500
$145median
$40$327
GMCwide ±146%
GMC Terrain
$84median
$40$285
GMCwide ±116%
GMC Yukon
$155median
$45$404
Common questions
GMC Canyon control arm FAQ
How much is a used control arm for a GMC Canyon?
The median asking price is $116 across 1,054 priced listings from 193 yards. Grade-A units, the cleanest stock, have a median of $132. 2020 is the cheapest model year we track, with a median of $82.
How much does it cost to replace a GMC Canyon control arm?
Using a used part, a GMC Canyon control arm replacement typically runs $210–$565 all-in: the median used control arm for this model lists at $116, and independent-shop labor for control arm replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include a wheel alignment after installation. Labor is a national part-level estimate, not a quote for your vehicle.
Which GMC Canyon model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which GMC Canyon control arm years are interchangeable?
Salvage-yard interchange data links GMC Canyon control arm fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026. Searching all 13 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.