GMC Yukon control arm price snapshot
- Low
- $45
- Average
- $161
- High
- $404
Vehicle-specific price guide
How much is a used GMC Yukon control arm?
Asking prices from 107 salvage yards in 21 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 19, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the GMC Yukon control arm
What the control arm does, common failure signs, and prices across all vehicles: used control arm price guide →
Also known asLower Control ArmA-ArmWishbone
Price summary
A used GMC Yukon control arm costs $45 to $404, with a median asking price of $155. Based on 886 priced salvage yard listings across the US, compatible across 2014–2025 (12 model years), updated Sep 19, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$145
Grade B (good)$189
Grade C (fair)$65
USD
Condition comparison
Price by part grade
Grade AClean / low wear$50–$404547 listings
Grade BStandard used$45–$400252 listings
Grade CVisible wear$65–$809 listings
Grade XUngraded$65–$25078 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $50–$404 | 547 | |
| Grade BStandard used | $45–$400 | 252 | |
| Grade CVisible wear | $65–$80 | 9 | |
| Grade XUngraded | $65–$250 | 78 |
Median by grade
Grade price comparison
Grade A$145
Grade B$189
Grade C$65
Ungraded$100
Median asking price by seller-reported condition grade · $45–$404 overall range
Regional supply
Where the GMC Yukon control arm is listed
We found priced GMC Yukon control arm listings at 107 salvage yards across 21 states. California supplies the most, with 280 listings (32% of the total) from 19 yards. Location matters: yards in Wisconsin ask a median $75, while Florida yards ask $260, 247% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| California | 280 | 19 | $125-19% |
| Florida | 120 | 15 | $260+68% |
| Illinois | 96 | 6 | $172+11% |
| Arizona | 86 | 9 | $110-29% |
| Colorado | 67 | 5 | $182+17% |
| Texas | 54 | 22 | $100-35% |
| Indiana | 46 | 3 | $145-6% |
| Wisconsin | 24 | 2 | $75-52% |
States with at least 10 priced listings. % is versus the $155 national median.
Replacement cost
What is the GMC Yukon control arm replacement cost?
- Used part
- $155
- GMC Yukon median asking price
- Labor
- $95–$450
- 1–3 hours at $95–$150/hr
- Estimated total
- $250–$605
- median used part + labor
Labor is a typical independent-shop range for control arm replacement, not a quote for your vehicle; it does not include a wheel alignment after installation. The part price is the live median from the salvage-yard listings on this page. Full control arm replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a GMC Yukon control arm cost by year?
2025100 listingsFits 5 years$182$70 – $375202443 listingsFits 5 years$182$90 – $250202361 listingsFits 4 years$260$65 – $404202294 listingsFits 5 years$175$70 – $3472021100 listingsFits 4 years$254$65 – $4042020100 listingsFits 5 years$145$50 – $2492019100 listingsFits 5 years$145$50 – $2492018100 listingsFits 5 years$110$55 – $3232017100 listingsFits 7 years$100$45 – $2702016200 listingsFits 7 years$100$75 – $2262015100 listingsFits 4 years$100$75 – $226
Market analysis
How much does a used GMC Yukon control arm cost?
Asking prices for a used GMC Yukon control arm are unusually spread out: the top listing asks about 9 times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 123% premium over grade-C stock, with grade-A medians at $145.
Fitment variant moves the price more than most buyers expect. The most affordable variant we track, RH, lists at a $175 median, while LH commands $182, a 4% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.
Model year matters too: 2015 units carry the lowest median at $100, while 2023 tops the table at $260. Parts from 2014–2017 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 4 compatible years.
Against comparable vehicles, the GMC Yukon sits 20% below the Toyota 4Runner ($193), 14% below the Mercedes S Class ($180), and 55% above the Mercedes E Class ($100) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used control arm: what to check
- Inspect ball joint boot and stud play: Check for torn rubber dust boots, cracked grease seals, or lateral movement in the ball joint stud when flexed with a pry bar.
- Check rubber bushing integrity: Look for dry-rotted, torn, or fluid-leaking hydraulic suspension bushings where the arm mounts to the subframe.
- Verify structural straightness against factory specs: Compare the arm against original dimensions to spot subtle bends caused by curb strikes or suspension impacts.
- Confirm ball joint attachment design: Determine whether the arm uses a bolt-on ball joint or an integrated press-fit socket to anticipate future maintenance needs.
- Torque bushing bolts at ride height only: Tightening subframe pivot bolts while the vehicle is raised on jacks twists rubber bushings and causes premature tearing.
Keep browsing this vehicle
What other GMC Yukon parts are priced?
01wide ±197%
Wheels
$300median
$67$1,250
02wide ±162%
Side Mirror
$229median
$50$794
03wide ±262%
Transfer Case
$287median
$61$1,563
04wide ±78%
Transmission
$2,595median
$1,295$5,342
05wide ±231%
Strut
$265median
$50$1,272
06wide ±152%
Radiator
$233median
$70$779
07wide ±66%
Headlight Assembly
$750median
$282$1,268
08wide ±161%
Grille
$350median
$65$1,195
09wide ±106%
Alternator
$136median
$35$323
10wide ±120%
Starter
$113median
$35$306
11wide ±151%
Axle Shaft
$150median
$40$493
12wide ±124%
Tail Light
$308median
$59$822
Price comparisons
Compare GMC Yukon control arm prices
Control Armcompare
Toyota4RunnervsGMCYukon
4Runner$193
Yukon$155
$38 diff8,432 listings
Control ArmcompareMercedesSClassvsGMCYukon
Class$180
Yukon$155
$25 diff7,596 listings
Control ArmcompareChevyCamarovsGMCYukon
Camaro$125
Yukon$155
$30 diff6,367 listings
Control ArmcompareMercedesGLEClassvsGMCYukon
Class$319
Yukon$155
$164 diff5,594 listings
Control ArmcompareFordExplorervsGMCYukon
Explorer$125
Yukon$155
$30 diff4,656 listings
Control ArmcompareChrysler300vsGMCYukon
300$80
Yukon$155
$75 diff4,322 listings
Compare fitments
What do similar vehicles charge for this part?
Acurawide ±105%
Acura ILX
$75median
$34$191
Acurawide ±151%
Acura Integra
$167median
$65$569
Acurawide ±162%
Acura MDX
$165median
$45$581
Acurawide ±127%
Acura RDX
$128median
$30$355
Acurawide ±232%
Acura TLX
$88median
$35$443
Audiwide ±179%
Audi A4
$85median
$35$339
Audiwide ±167%
Audi A6
$120median
$36$437
Audiwide ±98%
Audi Q3
$143median
$40$321
GMCwide ±143%
GMC Acadia
$100median
$35$321
GMCwide ±145%
GMC Canyon
$116median
$35$372
GMCwide ±99%
GMC Sierra 1500
$145median
$40$327
GMCwide ±146%
GMC Terrain
$84median
$40$285
Common questions
GMC Yukon control arm FAQ
How much is a used control arm for a GMC Yukon?
The median asking price is $155 across 886 priced listings from 107 yards. Grade-A units, the cleanest stock, have a median of $145. 2017 is the cheapest model year we track, with a median of $100.
How much does it cost to replace a GMC Yukon control arm?
Using a used part, a GMC Yukon control arm replacement typically runs $250–$605 all-in: the median used control arm for this model lists at $155, and independent-shop labor for control arm replacement typically takes 1–3 hours at $95–$150/hr ($95–$450). The labor figure does not include a wheel alignment after installation. Labor is a national part-level estimate, not a quote for your vehicle.
Which GMC Yukon model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which GMC Yukon control arm years are interchangeable?
Salvage-yard interchange data links GMC Yukon control arm fitments across 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 12 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.