Used Subaru Forester intake manifold from a salvage yard

Vehicle-specific price guide

How much is a used Subaru Forester intake manifold?

Asking prices from 262 salvage yards in 39 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 22, 2026
Strong coverage1,296 priced of 1,760 observed8 variantsMethodology v2.1 →

Part overview

About the Subaru Forester intake manifold

What the intake manifold does, common failure signs, and prices across all vehicles: used intake manifold price guide →

Also known asInlet Manifold
Price summary

A used Subaru Forester intake manifold costs $25 to $450, with a median asking price of $126. Based on 1,296 priced salvage yard listings across the US, compatible across 2012–2025 (14 model years), updated Oct 22, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$131
Grade B (good)$130
Grade C (fair)$68

Subaru Forester intake manifold price snapshot

USD
Low
$25
Average
$138
High
$450
1,760 listings observed · 1,296 priced9d ago· How we price·

Report incorrect price

Reporting price for Subaru Forester Intake Manifold

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$25–$449978 listings
Grade BStandard used$25–$440134 listings
Grade CVisible wear$45–$19027 listings
Grade XUngraded$25–$450157 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $25–$450 overall range

Regional supply

Where the Subaru Forester intake manifold is listed

We found priced Subaru Forester intake manifold listings at 262 salvage yards across 39 states. California supplies the most, with 294 listings (21% of the total) from 31 yards. Location matters: yards in California ask a median $75, while Ohio yards ask $181, 141% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
California29431$75-40%
Michigan9223$150+19%
Texas757$131+4%
Washington734$76-40%
Utah606$110-13%
Ohio5811$181+44%
Indiana579$100-21%
Colorado5111$85-33%

States with at least 10 priced listings. % is versus the $126 national median.

Replacement cost

What is the Subaru Forester intake manifold replacement cost?

ESTIMATE
Used part
$126
Subaru Forester median asking price
Labor
$190–$750
2–5 hours at $95–$150/hr
Estimated total
$315–$875
median used part + labor

Labor is a typical independent-shop range for intake manifold replacement, not a quote for your vehicle; it does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. The part price is the live median from the salvage-yard listings on this page. Full intake manifold replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Subaru Forester Intake Manifold

$

Current avg: $138 — we suggest $117 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2025)

gasoline, Wilderness36 listingsInterchange 2019–2024$156$75 – $332
gasoline, Convenience22 listingsInterchange 2021–2025$215$164 – $449
gasoline, Limited22 listingsInterchange 2021–2025$215$164 – $449
gasoline, Touring22 listingsInterchange 2021–2025$215$164 – $449
gasoline, Base13 listingsInterchange 2021–2025$215$164 – $415
gasoline, Premier13 listingsInterchange 2021–2025$215$164 – $415
gasoline, Sport13 listingsInterchange 2021–2025$215$164 – $415
gasoline, Premium12 listingsInterchange 2021–2025$283$164 – $415

Model-year comparison

What does a Subaru Forester intake manifold cost by year?

$68$116$165$214$26320152016201720182019202020212022202320242025
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Subaru Forester intake manifold cost?

Asking prices for a used Subaru Forester intake manifold are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 93% premium over grade-C stock, with grade-A medians at $131.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, gasoline, Wilderness, lists at a $156 median, while gasoline, Premium commands $283, a 81% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $75, while 2020 tops the table at $250. Parts from 2012–2021 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 10 compatible years.

Against comparable vehicles, the Subaru Forester sits 30% below the Mercedes S Class ($181), 46% below the Ram 3500 ($235), and level with the Mercedes E Class ($126) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used intake manifold: what to check

  1. Inspect composite runners for heat cracks: Examine plastic manifolds for oil-softened walls, heat cracks, or snapped vacuum port nipples along the plenum.
  2. Verify variable runner flap operation: Move variable intake runner flap linkages and vacuum actuators by hand to ensure internal butterfly valves rotate freely.
  3. Check rubber gasket groove channels: Examine sealing channels around cylinder head intake ports to ensure plastic retaining walls are not chipped.
  4. Confirm sensor port and throttle flange fit: Match vacuum line nipples, manifold absolute pressure sensor mounts, and throttle body bolt dimensions.
  5. Install new molded rubber port gaskets: Replace all port seals and throttle body gaskets with fresh silicone seals to prevent lean engine vacuum leaks.

Keep browsing this vehicle

What other Subaru Forester parts are priced?

Price comparisons

Compare Subaru Forester intake manifold prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Subaru Forester intake manifold FAQ

How much is a used intake manifold for a Subaru Forester?

The median asking price is $126 across 1,296 priced listings from 262 yards. Grade-A units, the cleanest stock, have a median of $131. 2018 is the cheapest model year we track, with a median of $75.

How much does it cost to replace a Subaru Forester intake manifold?

Using a used part, a Subaru Forester intake manifold replacement typically runs $315–$875 all-in: the median used intake manifold for this model lists at $126, and independent-shop labor for intake manifold replacement typically takes 2–5 hours at $95–$150/hr ($190–$750). The labor figure does not include new gaskets, coolant refill on V-engines, and throttle body cleaning if needed. Labor is a national part-level estimate, not a quote for your vehicle.

Which Subaru Forester model years does this price guide cover?

This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Subaru Forester intake manifold years are interchangeable?

Salvage-yard interchange data links Subaru Forester intake manifold fitments across 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 14 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Subaru Forester Intake Manifold Cost — From $25 to $450