Used Audi A6 torque converter from a salvage yard

Vehicle-specific price guide

How much is a used Audi A6 torque converter?

Asking prices from 8 salvage yards in 5 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 22, 2026
Moderate coverage35 priced of 55 observed5 variantsMethodology v2.1 →

Part overview

About the Audi A6 torque converter

What the torque converter does, common failure signs, and prices across all vehicles: used torque converter price guide →

Also known asTransmission Torque ConverterTorque Convertor
Price summary

A used Audi A6 torque converter costs $250 to $511, with a median asking price of $400. Based on 35 priced salvage yard listings across the US, updated Oct 22, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$400

Audi A6 torque converter price snapshot

USD
Low
$250
Average
$398
High
$511
55 listings observed · 35 pricedUpdated 6d ago· How we price·

Report incorrect price

Reporting price for Audi A6 Torque Converter

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$250–$51135 listings

Replacement cost

What is the Audi A6 torque converter replacement cost?

ESTIMATE
Used part
$400
Audi A6 median asking price
Labor
$475–$1,500
5–10 hours at $95–$150/hr
Estimated total
$875–$1,900
median used part + labor

Labor is a typical independent-shop range for torque converter replacement, not a quote for your vehicle; it does not include transmission fluid and filter, since the transmission must be removed to access the converter. The part price is the live median from the salvage-yard listings on this page. Full torque converter replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Audi A6 Torque Converter

$

Current avg: $398 — we suggest $338 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2018)

Other years201720162015

Search using Audi A6 and similar models

4 listings
$250$250 – $400

Search using only Audi A6

4 listings
$250$250 – $400

A6 Quattro; 3.0L; Premium Plus; (6 cyl)

3 listings
$444$349 – $511

A6 Quattro; Prestige

3 listings
$444$349 – $511

A6 Quattro; 2.0L; Premium Plus; (4-121)

1 listings
$400$400 – $400

Model-year comparison

What does a Audi A6 torque converter cost by year?

$314$352$390$428$4662015201620172018
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Audi A6 torque converter cost?

Asking prices for a used Audi A6 torque converter sit in a fairly tight band around the $400 median, so most quotes far outside it deserve a second look.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, Search using Audi A6 and similar models, lists at a $250 median, while A6 Quattro; Prestige commands $444, a 78% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2018 units carry the lowest median at $349, while 2015 tops the table at $444. Year-level pages linked in the table above break each one down by grade and variant.

Against comparable vehicles, the Audi A6 sits 83% above the Jeep Compass ($219), 86% above the Jeep Cherokee ($215), and 64% above the Volkswagen Atlas ($244) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used torque converter: what to check

  1. Inspect hub neck snout and drive notch: Check the small transmission pump drive neck for deep grooves, burrs, or rounded drive blade notches.
  2. Verify internal stator one-way clutch operation: Insert a spline tool into the stator hub to confirm it locks firmly in one direction and spins freely in the other.
  3. Check starter ring gear tooth condition: Examine outer perimeter ring gear teeth for chipped, rounded, or ground-down teeth caused by starter engagement failures.
  4. Confirm pilot hub diameter and bolt pattern: Measure pilot stub diameter and bolt circle spacing to match your engine crankshaft and flexplate layout.
  5. Fully seat converter splines before transmission bolting: Spin and push the converter until it drops past two distinct spline steps into the oil pump drive.

Keep browsing this vehicle

What other Audi A6 parts are priced?

Price comparisons

Compare Audi A6 torque converter prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Audi A6 torque converter FAQ

How much is a used torque converter for a Audi A6?

The median asking price is $400 across 35 priced listings from 8 yards. Grade-A units, the cleanest stock, have a median of $400. 2018 is the cheapest model year we track, with a median of $349.

How much does it cost to replace a Audi A6 torque converter?

Using a used part, a Audi A6 torque converter replacement typically runs $875–$1,900 all-in: the median used torque converter for this model lists at $400, and independent-shop labor for torque converter replacement typically takes 5–10 hours at $95–$150/hr ($475–$1,500). The labor figure does not include transmission fluid and filter, since the transmission must be removed to access the converter. Labor is a national part-level estimate, not a quote for your vehicle.

Which Audi A6 model years does this price guide cover?

This guide currently has year-level pricing for 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Used Audi A6 Torque Converter Cost — From $250 to $511