Used BMW X3 torque converter from a salvage yard

Vehicle-specific price guide

How much is a used BMW X3 torque converter?

Asking prices from 12 salvage yards in 8 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 21, 2026
Moderate coverage31 priced of 119 observed1 variantMethodology v2.1 →

Part overview

About the BMW X3 torque converter

What the torque converter does, common failure signs, and prices across all vehicles: used torque converter price guide →

Also known asTransmission Torque ConverterTorque Convertor
Price summary

A used BMW X3 torque converter costs $132 to $449, with a median asking price of $250. Based on 31 priced salvage yard listings across the US, compatible across 2011–2019 (9 model years), updated Oct 21, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$250

BMW X3 torque converter price snapshot

USD
Low
$132
Average
$257
High
$449
119 listings observed · 31 priced12d ago· How we price·

Report incorrect price

Reporting price for BMW X3 Torque Converter

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$132–$44927 listings
Grade XUngraded$170–$3504 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $132–$449 overall range

Replacement cost

What is the BMW X3 torque converter replacement cost?

ESTIMATE
Used part
$250
BMW X3 median asking price
Labor
$475–$1,500
5–10 hours at $95–$150/hr
Estimated total
$725–$1,750
median used part + labor

Labor is a typical independent-shop range for torque converter replacement, not a quote for your vehicle; it does not include transmission fluid and filter, since the transmission must be removed to access the converter. The part price is the live median from the salvage-yard listings on this page. Full torque converter replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for BMW X3 Torque Converter

$

Current avg: $257 — we suggest $218 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2021)

M40i

1 listings
Interchange 2018–2019$250$250 – $250

Model-year comparison

What does a BMW X3 torque converter cost by year?

$119$155$191$227$2632015201620172018201920202021
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used BMW X3 torque converter cost?

Asking prices for a used BMW X3 torque converter are unusually spread out: the top listing asks about 3 times what the cheapest does, so which unit you pick matters more than the median.

Model year matters too: 2019 units carry the lowest median at $132, while 2016 tops the table at $250. Parts from 2017–2019 are interchangeable, so if the 2019 fits your vehicle, it offers the best value across 3 compatible years.

Against comparable vehicles, the BMW X3 sits 14% above the Jeep Compass ($219), 16% above the Jeep Cherokee ($215), and 2% above the Volkswagen Atlas ($244) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used torque converter: what to check

  1. Inspect hub neck snout and drive notch: Check the small transmission pump drive neck for deep grooves, burrs, or rounded drive blade notches.
  2. Verify internal stator one-way clutch operation: Insert a spline tool into the stator hub to confirm it locks firmly in one direction and spins freely in the other.
  3. Check starter ring gear tooth condition: Examine outer perimeter ring gear teeth for chipped, rounded, or ground-down teeth caused by starter engagement failures.
  4. Confirm pilot hub diameter and bolt pattern: Measure pilot stub diameter and bolt circle spacing to match your engine crankshaft and flexplate layout.
  5. Fully seat converter splines before transmission bolting: Spin and push the converter until it drops past two distinct spline steps into the oil pump drive.

Keep browsing this vehicle

What other BMW X3 parts are priced?

Price comparisons

Compare BMW X3 torque converter prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

BMW X3 torque converter FAQ

How much is a used torque converter for a BMW X3?

The median asking price is $250 across 31 priced listings from 12 yards. Grade-A units, the cleanest stock, have a median of $250. 2019 is the cheapest model year we track, with a median of $132.

How much does it cost to replace a BMW X3 torque converter?

Using a used part, a BMW X3 torque converter replacement typically runs $725–$1,750 all-in: the median used torque converter for this model lists at $250, and independent-shop labor for torque converter replacement typically takes 5–10 hours at $95–$150/hr ($475–$1,500). The labor figure does not include transmission fluid and filter, since the transmission must be removed to access the converter. Labor is a national part-level estimate, not a quote for your vehicle.

Which BMW X3 model years does this price guide cover?

This guide currently has year-level pricing for 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which BMW X3 torque converter years are interchangeable?

Salvage-yard interchange data links BMW X3 torque converter fitments across 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019. Searching all 9 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used BMW X3 Torque Converter Cost — From $132 to $449