Used Audi Q3 torque converter from a salvage yard

Vehicle-specific price guide

How much is a used Audi Q3 torque converter?

Asking prices from 7 salvage yards in 5 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 11, 2026
Moderate coverage43 priced of 107 observed2 variantsMethodology v2.1 →

Part overview

About the Audi Q3 torque converter

What the torque converter does, common failure signs, and prices across all vehicles: used torque converter price guide →

Also known asTransmission Torque ConverterTorque Convertor
Price summary

A used Audi Q3 torque converter costs $136 to $195, with a median asking price of $161. Based on 43 priced salvage yard listings across the US, compatible across 2014–2020 (6 model years), updated Oct 11, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$161

Audi Q3 torque converter price snapshot

USD
Low
$136
Average
$157
High
$195
107 listings observed · 43 priced18d ago· How we price·

Report incorrect price

Reporting price for Audi Q3 Torque Converter

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$160–$19523 listings
Grade XUngraded$136–$16120 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $136–$195 overall range

Replacement cost

What is the Audi Q3 torque converter replacement cost?

ESTIMATE
Used part
$161
Audi Q3 median asking price
Labor
$475–$1,500
5–10 hours at $95–$150/hr
Estimated total
$635–$1,660
median used part + labor

Labor is a typical independent-shop range for torque converter replacement, not a quote for your vehicle; it does not include transmission fluid and filter, since the transmission must be removed to access the converter. The part price is the live median from the salvage-yard listings on this page. Full torque converter replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Audi Q3 Torque Converter

$

Current avg: $157 — we suggest $133 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2018)

Q3; Premium & Premium Plus

4 listings
Interchange 2014–2018$161$136 – $161

Q3 Quattro; Premium & Premium Plus

4 listings
Interchange 2014–2018$161$136 – $161

Model-year comparison

What does a Audi Q3 torque converter cost by year?

$145$160$175$190$2052015201620172018201920202021
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Audi Q3 torque converter cost?

Asking prices for a used Audi Q3 torque converter sit in a fairly tight band around the $161 median, so most quotes far outside it deserve a second look.

Model year matters too: 2015 units carry the lowest median at $161, while 2019 tops the table at $195. Parts from 2014–2018 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 5 compatible years.

Against comparable vehicles, the Audi Q3 sits 26% below the Jeep Compass ($219), 25% below the Jeep Cherokee ($215), and 34% below the Volkswagen Atlas ($244) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used torque converter: what to check

  1. Inspect hub neck snout and drive notch: Check the small transmission pump drive neck for deep grooves, burrs, or rounded drive blade notches.
  2. Verify internal stator one-way clutch operation: Insert a spline tool into the stator hub to confirm it locks firmly in one direction and spins freely in the other.
  3. Check starter ring gear tooth condition: Examine outer perimeter ring gear teeth for chipped, rounded, or ground-down teeth caused by starter engagement failures.
  4. Confirm pilot hub diameter and bolt pattern: Measure pilot stub diameter and bolt circle spacing to match your engine crankshaft and flexplate layout.
  5. Fully seat converter splines before transmission bolting: Spin and push the converter until it drops past two distinct spline steps into the oil pump drive.

Keep browsing this vehicle

What other Audi Q3 parts are priced?

Price comparisons

Compare Audi Q3 torque converter prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Audi Q3 torque converter FAQ

How much is a used torque converter for a Audi Q3?

The median asking price is $161 across 43 priced listings from 7 yards. Grade-A units, the cleanest stock, have a median of $161. 2018 is the cheapest model year we track, with a median of $161.

How much does it cost to replace a Audi Q3 torque converter?

Using a used part, a Audi Q3 torque converter replacement typically runs $635–$1,660 all-in: the median used torque converter for this model lists at $161, and independent-shop labor for torque converter replacement typically takes 5–10 hours at $95–$150/hr ($475–$1,500). The labor figure does not include transmission fluid and filter, since the transmission must be removed to access the converter. Labor is a national part-level estimate, not a quote for your vehicle.

Which Audi Q3 model years does this price guide cover?

This guide currently has year-level pricing for 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Audi Q3 torque converter years are interchangeable?

Salvage-yard interchange data links Audi Q3 torque converter fitments across 2014, 2015, 2016, 2017, 2018, 2020. Searching all 6 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Audi Q3 Torque Converter Cost — From $136 to $195