Used Infiniti QX60 torque converter from a salvage yard

Vehicle-specific price guide

How much is a used Infiniti QX60 torque converter?

Asking prices from 5 salvage yards in 5 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 17, 2026
Limited coverage10 priced of 12 observed2 variantsMethodology v2.1 →

Part overview

About the Infiniti QX60 torque converter

What the torque converter does, common failure signs, and prices across all vehicles: used torque converter price guide →

Also known asTransmission Torque ConverterTorque Convertor
Price summary

A used Infiniti QX60 torque converter costs $249 to $374, with a median asking price of $374. Based on 10 priced salvage yard listings across the US, compatible across 2015–2023 (3 model years), updated Oct 17, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$374

Infiniti QX60 torque converter price snapshot

USD
Low
$249
Average
$324
High
$374
12 listings observed · 10 priced12d ago· How we price·

Report incorrect price

Reporting price for Infiniti QX60 Torque Converter

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$249–$37410 listings

Replacement cost

What is the Infiniti QX60 torque converter replacement cost?

ESTIMATE
Used part
$374
Infiniti QX60 median asking price
Labor
$475–$1,500
5–10 hours at $95–$150/hr
Estimated total
$850–$1,875
median used part + labor

Labor is a typical independent-shop range for torque converter replacement, not a quote for your vehicle; it does not include transmission fluid and filter, since the transmission must be removed to access the converter. The part price is the live median from the salvage-yard listings on this page. Full torque converter replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Infiniti QX60 Torque Converter

$

Current avg: $324 — we suggest $275 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2019)

Other years202320222015

Non-Interchange search using Infiniti QX60 and similar models

1 listings
$250$250 – $250

Non-Interchange search using only Infiniti QX60

1 listings
$250$250 – $250

Model-year comparison

What does a Infiniti QX60 torque converter cost by year?

$225$267$309$351$393201920222023
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Infiniti QX60 torque converter cost?

Asking prices for a used Infiniti QX60 torque converter sit in a fairly tight band around the $374 median, so most quotes far outside it deserve a second look.

Model year matters too: 2019 units carry the lowest median at $250, while 2022 tops the table at $374. Year-level pages linked in the table above break each one down by grade and variant.

Against comparable vehicles, the Infiniti QX60 sits 71% above the Jeep Compass ($219), 74% above the Jeep Cherokee ($215), and 53% above the Volkswagen Atlas ($244) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used torque converter: what to check

  1. Inspect hub neck snout and drive notch: Check the small transmission pump drive neck for deep grooves, burrs, or rounded drive blade notches.
  2. Verify internal stator one-way clutch operation: Insert a spline tool into the stator hub to confirm it locks firmly in one direction and spins freely in the other.
  3. Check starter ring gear tooth condition: Examine outer perimeter ring gear teeth for chipped, rounded, or ground-down teeth caused by starter engagement failures.
  4. Confirm pilot hub diameter and bolt pattern: Measure pilot stub diameter and bolt circle spacing to match your engine crankshaft and flexplate layout.
  5. Fully seat converter splines before transmission bolting: Spin and push the converter until it drops past two distinct spline steps into the oil pump drive.

Keep browsing this vehicle

What other Infiniti QX60 parts are priced?

Price comparisons

Compare Infiniti QX60 torque converter prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Infiniti QX60 torque converter FAQ

How much is a used torque converter for a Infiniti QX60?

The median asking price is $374 across 10 priced listings from 5 yards. Grade-A units, the cleanest stock, have a median of $374. 2019 is the cheapest model year we track, with a median of $250.

How much does it cost to replace a Infiniti QX60 torque converter?

Using a used part, a Infiniti QX60 torque converter replacement typically runs $850–$1,875 all-in: the median used torque converter for this model lists at $374, and independent-shop labor for torque converter replacement typically takes 5–10 hours at $95–$150/hr ($475–$1,500). The labor figure does not include transmission fluid and filter, since the transmission must be removed to access the converter. Labor is a national part-level estimate, not a quote for your vehicle.

Which Infiniti QX60 model years does this price guide cover?

This guide currently has year-level pricing for 2023, 2022, 2019, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Infiniti QX60 torque converter years are interchangeable?

Salvage-yard interchange data links Infiniti QX60 torque converter fitments across 2015, 2019, 2023. Searching all 3 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Infiniti QX60 Torque Converter Cost — From $249 to $374