Used Subaru Outback torque converter from a salvage yard

Vehicle-specific price guide

How much is a used Subaru Outback torque converter?

Asking prices from 2 salvage yards in 2 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 15, 2026
Limited coverage8 priced of 16 observed2 variantsMethodology v2.1 →

Part overview

About the Subaru Outback torque converter

What the torque converter does, common failure signs, and prices across all vehicles: used torque converter price guide →

Also known asTransmission Torque ConverterTorque Convertor
Price summary

A used Subaru Outback torque converter costs $250 to $300, with a median asking price of $300. Based on 8 priced salvage yard listings across the US, compatible across 2015–2024 (7 model years), updated Sep 15, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$300

Subaru Outback torque converter price snapshot

USD
Low
$250
Average
$277
High
$300
16 listings observed · 8 priced1mo ago· How we price·

Report incorrect price

Reporting price for Subaru Outback Torque Converter

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$250–$3008 listings

Replacement cost

What is the Subaru Outback torque converter replacement cost?

ESTIMATE
Used part
$300
Subaru Outback median asking price
Labor
$475–$1,500
5–10 hours at $95–$150/hr
Estimated total
$775–$1,800
median used part + labor

Labor is a typical independent-shop range for torque converter replacement, not a quote for your vehicle; it does not include transmission fluid and filter, since the transmission must be removed to access the converter. The part price is the live median from the salvage-yard listings on this page. Full torque converter replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Subaru Outback Torque Converter

$

Current avg: $277 — we suggest $235 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2024)

Non-Interchange search using only Subaru Outback (Impreza)

1 listings
$250$250 – $250

Non-Interchange search using Subaru Outback (Impreza) and similar models

1 listings
$250$250 – $250

Model-year comparison

What does a Subaru Outback torque converter cost by year?

$225$248$270$293$3152015201620222024
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Subaru Outback torque converter cost?

Asking prices for a used Subaru Outback torque converter sit in a fairly tight band around the $300 median, so most quotes far outside it deserve a second look.

Model year matters too: 2024 units carry the lowest median at $250, while 2015 tops the table at $300. Year-level pages linked in the table above break each one down by grade and variant.

Against comparable vehicles, the Subaru Outback sits 37% above the Jeep Compass ($219), 40% above the Jeep Cherokee ($215), and 23% above the Volkswagen Atlas ($244) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used torque converter: what to check

  1. Inspect hub neck snout and drive notch: Check the small transmission pump drive neck for deep grooves, burrs, or rounded drive blade notches.
  2. Verify internal stator one-way clutch operation: Insert a spline tool into the stator hub to confirm it locks firmly in one direction and spins freely in the other.
  3. Check starter ring gear tooth condition: Examine outer perimeter ring gear teeth for chipped, rounded, or ground-down teeth caused by starter engagement failures.
  4. Confirm pilot hub diameter and bolt pattern: Measure pilot stub diameter and bolt circle spacing to match your engine crankshaft and flexplate layout.
  5. Fully seat converter splines before transmission bolting: Spin and push the converter until it drops past two distinct spline steps into the oil pump drive.

Keep browsing this vehicle

What other Subaru Outback parts are priced?

Price comparisons

Compare Subaru Outback torque converter prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Subaru Outback torque converter FAQ

How much is a used torque converter for a Subaru Outback?

The median asking price is $300 across 8 priced listings from 2 yards. Grade-A units, the cleanest stock, have a median of $300. 2024 is the cheapest model year we track, with a median of $250.

How much does it cost to replace a Subaru Outback torque converter?

Using a used part, a Subaru Outback torque converter replacement typically runs $775–$1,800 all-in: the median used torque converter for this model lists at $300, and independent-shop labor for torque converter replacement typically takes 5–10 hours at $95–$150/hr ($475–$1,500). The labor figure does not include transmission fluid and filter, since the transmission must be removed to access the converter. Labor is a national part-level estimate, not a quote for your vehicle.

Which Subaru Outback model years does this price guide cover?

This guide currently has year-level pricing for 2024, 2022, 2021, 2019, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Subaru Outback torque converter years are interchangeable?

Salvage-yard interchange data links Subaru Outback torque converter fitments across 2015, 2016, 2017, 2019, 2021, 2022, 2024. Searching all 7 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Subaru Outback Torque Converter Cost — From $250 to $300