GMC Canyon axle shaft price snapshot
- Low
- $38
- Average
- $171
- High
- $625
Vehicle-specific price guide
How much is a used GMC Canyon axle shaft?
Asking prices from 204 salvage yards in 37 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 20, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the GMC Canyon axle shaft
What the axle shaft does, common failure signs, and prices across all vehicles: used axle shaft price guide →
Also known asCV AxleCV ShaftDrive AxleHalf ShaftAxle AssemblyCovers front CV axles and rear axle shafts.
Price summary
A used GMC Canyon axle shaft costs $38 to $625, with a median asking price of $150. Based on 1,368 priced salvage yard listings across the US, compatible across 2015–2025 (11 model years), updated Oct 20, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$175
Grade B (good)$125
Grade C (fair)$150
USD
Condition comparison
Price by part grade
Grade AClean / low wear$50–$625842 listings
Grade BStandard used$38–$296270 listings
Grade CVisible wear$100–$15010 listings
Grade XUngraded$75–$300246 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $50–$625 | 842 | |
| Grade BStandard used | $38–$296 | 270 | |
| Grade CVisible wear | $100–$150 | 10 | |
| Grade XUngraded | $75–$300 | 246 |
Median by grade
Grade price comparison
Grade A$175
Grade B$125
Grade C$150
Ungraded$100
Median asking price by seller-reported condition grade · $38–$625 overall range
Regional supply
Where the GMC Canyon axle shaft is listed
We found priced GMC Canyon axle shaft listings at 204 salvage yards across 37 states. Florida supplies the most, with 135 listings (9% of the total) from 18 yards. Location matters: yards in Florida ask a median $100, while North Carolina yards ask $175, 75% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Florida | 135 | 18 | $100-33% |
| Illinois | 123 | 12 | $166+11% |
| Georgia | 123 | 7 | $175+17% |
| California | 109 | 19 | $101-33% |
| Texas | 105 | 17 | $150 |
| Indiana | 82 | 4 | $116-23% |
| North Carolina | 67 | 9 | $175+17% |
| Pennsylvania | 61 | 8 | $100-33% |
States with at least 10 priced listings. % is versus the $150 national median.
Replacement cost
What is the GMC Canyon axle shaft replacement cost?
- Used part
- $150
- GMC Canyon median asking price
- Labor
- $95–$375
- 1–2.5 hours at $95–$150/hr
- Estimated total
- $245–$525
- median used part + labor
Labor is a typical independent-shop range for axle shaft replacement, not a quote for your vehicle. The part price is the live median from the salvage-yard listings on this page. How we price
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a GMC Canyon axle shaft cost by year?
2025100 listings$267$100 – $321202499 listingsFits 3 years$185$75 – $386202399 listingsFits 3 years$194$75 – $3862022224 listingsFits 8 years$162$75 – $3002021307 listingsFits 8 years$150$38 – $6252020317 listingsFits 8 years$150$40 – $6252019303 listingsFits 8 years$125$40 – $6252018350 listingsFits 8 years$142$71 – $3002017307 listingsFits 8 years$150$38 – $6252016311 listingsFits 8 years$135$55 – $6252015233 listingsFits 8 years$125$60 – $625
Market analysis
How much does a used GMC Canyon axle shaft cost?
Asking prices for a used GMC Canyon axle shaft are unusually spread out: the top listing asks more than ten times what the cheapest does, so which unit you pick matters more than the median. Condition matters: grade-A units (lowest mileage, best condition) carry roughly a 17% premium over grade-C stock, with grade-A medians at $175.
Model year matters too: 2015 units carry the lowest median at $125, while 2025 tops the table at $267. Parts from 2015–2022 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 8 compatible years.
Against comparable vehicles, the GMC Canyon sits 48% below the Mercedes GLE Class ($287), 26% below the Mercedes C Class ($202), and 28% below the Mercedes E Class ($209) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used axle shaft: what to check
- Inspect CV boots for cracks. A torn boot means the joint has likely ingested grit.
- Confirm ABS ring compatibility with your sensor setup.
- Left and right shafts usually differ in length, so verify the side.
- Spin the joints through full articulation and listen for clicking.
Keep browsing this vehicle
What other GMC Canyon parts are priced?
01wide ±198%
Transmission Control Module
$106median
$20$440
02wide ±290%
Car Radio
$120median
$25$722
03wide ±174%
Front Seat
$211median
$61$795
04wide ±214%
Air Bag
$223median
$45$1,000
05wide ±120%
Drive Shaft
$191median
$60$520
06wide ±201%
Wheels
$200median
$47$850
07wide ±156%
Side Mirror
$186median
$41$620
08wide ±115%
Transmission
$1,975median
$544$5,087
09wide ±79%
Quarter Panel
$606median
$266$1,225
10wide ±146%
Center Console
$159median
$35$500
11wide ±132%
AC Condenser
$159median
$40$460
12wide ±265%
Fuel Pump
$118median
$25$650
Price comparisons
Compare GMC Canyon axle shaft prices
Axle Shaftcompare
MercedesGLEClassvsGMCCanyon
Class$287
Canyon$150
$137 diff12,159 listings
Axle ShaftcompareMercedesCClassvsGMCCanyon
Class$202
Canyon$150
$52 diff10,708 listings
Axle ShaftcompareMercedesEClassvsGMCCanyon
Class$209
Canyon$150
$59 diff10,203 listings
Axle ShaftcompareJeepCherokeevsGMCCanyon
Cherokee$96
Canyon$150
$54 diff9,521 listings
Axle ShaftcompareHyundaiSantaFevsGMCCanyon
Fe$135
Canyon$150
$15 diff9,287 listings
Axle ShaftcompareJeepGrandCherokeevsGMCCanyon
Cherokee$151
Canyon$150
$1 diff8,876 listings
Compare fitments
What do similar vehicles charge for this part?
BMWwide ±272%
BMW X3
$204median
$34$1,144
BMWwide ±174%
BMW X5
$226median
$40$825
Chevywide ±168%
Chevy Equinox
$136median
$35$493
Chevywide ±214%
Chevy Malibu
$90median
$30$415
Chevywide ±132%
Chevy Silverado 1500
$160median
$45$468
Chevywide ±149%
Chevy Tahoe
$149median
$50$493
Chevywide ±171%
Chevy Traverse
$137median
$25$493
Dodgewide ±237%
Dodge Challenger
$190median
$35$937
Dodgewide ±252%
Dodge Charger
$155median
$30$812
Dodgewide ±230%
Dodge Durango
$126median
$30$609
GMCwide ±123%
GMC Sierra 1500
$165median
$50$456
GMCwide ±151%
GMC Yukon
$150median
$40$493
Common questions
GMC Canyon axle shaft FAQ
How much is a used axle shaft for a GMC Canyon?
The median asking price is $150 across 1,368 priced listings from 204 yards. Grade-A units, the cleanest stock, have a median of $175. 2019 is the cheapest model year we track, with a median of $125.
How much does it cost to replace a GMC Canyon axle shaft?
Using a used part, a GMC Canyon axle shaft replacement typically runs $245–$525 all-in: the median used axle shaft for this model lists at $150, and independent-shop labor for axle shaft replacement typically takes 1–2.5 hours at $95–$150/hr ($95–$375). Labor is a national part-level estimate, not a quote for your vehicle.
Which GMC Canyon model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which GMC Canyon axle shaft years are interchangeable?
Salvage-yard interchange data links GMC Canyon axle shaft fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025. Searching all 11 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.