Acura Integra torque converter price snapshot
- Low
- $300
- Average
- $300
- High
- $300
Vehicle-specific price guide
How much is a used Acura Integra torque converter?
Salvage yard asking prices broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 5, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Acura Integra torque converter
What the torque converter does, common failure signs, and prices across all vehicles: used torque converter price guide →
Also known asTransmission Torque ConverterTorque Convertor
Price summary
A used Acura Integra torque converter costs $300 to $300, with a median asking price of $300. Based on 2 priced salvage yard listings across the US, updated Oct 5, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$300
USD
Condition comparison
Price by part grade
Grade AClean / low wear$300–$3002 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $300–$300 | 2 |
Replacement cost
What is the Acura Integra torque converter replacement cost?
- Used part
- $300
- Acura Integra median asking price
- Labor
- $475–$1,500
- 5–10 hours at $95–$150/hr
- Estimated total
- $775–$1,800
- median used part + labor
Labor is a typical independent-shop range for torque converter replacement, not a quote for your vehicle; it does not include transmission fluid and filter, since the transmission must be removed to access the converter. The part price is the live median from the salvage-yard listings on this page. Full torque converter replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Fitment matters
Price by trim & variant (2023)
Non-Interchange search using Acura Integra and similar models
1 listings$300$300 – $300Non-Interchange search using only Acura Integra
1 listings$300$300 – $300Model-year comparison
What does a Acura Integra torque converter cost by year?
Market analysis
How much does a used Acura Integra torque converter cost?
Asking prices for a used Acura Integra torque converter sit in a fairly tight band around the $300 median, so most quotes far outside it deserve a second look.
Against comparable vehicles, the Acura Integra sits 37% above the Jeep Compass ($219), 40% above the Jeep Cherokee ($215), and 23% above the Volkswagen Atlas ($244) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used torque converter: what to check
- Inspect hub neck snout and drive notch: Check the small transmission pump drive neck for deep grooves, burrs, or rounded drive blade notches.
- Verify internal stator one-way clutch operation: Insert a spline tool into the stator hub to confirm it locks firmly in one direction and spins freely in the other.
- Check starter ring gear tooth condition: Examine outer perimeter ring gear teeth for chipped, rounded, or ground-down teeth caused by starter engagement failures.
- Confirm pilot hub diameter and bolt pattern: Measure pilot stub diameter and bolt circle spacing to match your engine crankshaft and flexplate layout.
- Fully seat converter splines before transmission bolting: Spin and push the converter until it drops past two distinct spline steps into the oil pump drive.
Keep browsing this vehicle
What other Acura Integra parts are priced?
01wide ±218%
Transmission Control Module
$125median
$25$569
02wide ±190%
Air Bag
$276median
$60$1,107
03wide ±285%
Car Radio
$131median
$25$773
04wide ±143%
Brake Caliper
$120median
$25$368
05wide ±110%
ABS Module
$173median
$74$454
06wide ±154%
Axle Shaft
$154median
$50$525
07wide ±150%
Strut
$137median
$63$473
08wide ±134%
Front Seat
$265median
$90$800
09wide ±97%
Side Mirror
$334median
$125$771
10wide ±140%
Center Console
$171median
$55$534
11wide ±123%
Steering Wheel
$150median
$50$418
12wide ±116%
Steering Rack
$550median
$114$1,393
Compare fitments
What do similar vehicles charge for this part?
Acuraspread ±41%
Acura ILX
$305median
$90$340
Acurawide ±69%
Acura MDX
$400median
$199$750
Acuraspread ±33%
Acura RDX
$450median
$450$750
Acurawide ±62%
Acura TLX
$399median
$199$695
Audispread ±33%
Audi A6
$400median
$250$511
Auditight ±18%
Audi Q3
$161median
$136$195
Auditight ±18%
Audi Q5
$444median
$349$511
Audispread ±35%
Audi Q7
$250median
$175$350
BMWspread ±33%
BMW X1
$299median
$250$448
BMWwide ±63%
BMW X3
$250median
$132$449
BMWwide ±61%
BMW X5
$299median
$200$567
BMWspread ±43%
BMW X7
$210median
$210$390
Common questions
Acura Integra torque converter FAQ
How much is a used torque converter for a Acura Integra?
The median asking price is $300 across 2 priced listings. Grade-A units, the cleanest stock, have a median of $300.
How much does it cost to replace a Acura Integra torque converter?
Using a used part, a Acura Integra torque converter replacement typically runs $775–$1,800 all-in: the median used torque converter for this model lists at $300, and independent-shop labor for torque converter replacement typically takes 5–10 hours at $95–$150/hr ($475–$1,500). The labor figure does not include transmission fluid and filter, since the transmission must be removed to access the converter. Labor is a national part-level estimate, not a quote for your vehicle.
Which Acura Integra model years does this price guide cover?
This guide currently has year-level pricing for 2023. Other model years contribute to the overall range where sellers listed them without a year breakdown.