Used Dodge Charger torque converter from a salvage yard

Vehicle-specific price guide

How much is a used Dodge Charger torque converter?

Asking prices from 25 salvage yards in 16 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedSep 18, 2026
Strong coverage126 priced of 261 observed4 variantsMethodology v2.1 →

Part overview

About the Dodge Charger torque converter

What the torque converter does, common failure signs, and prices across all vehicles: used torque converter price guide →

Also known asTransmission Torque ConverterTorque Convertor
Price summary

A used Dodge Charger torque converter costs $160 to $300, with a median asking price of $250. Based on 126 priced salvage yard listings across the US, compatible across 2010–2023 (12 model years), updated Sep 18, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$250
Grade C (fair)$300

Dodge Charger torque converter price snapshot

USD
Low
$160
Average
$244
High
$300
261 listings observed · 126 priced1mo ago· How we price·

Report incorrect price

Reporting price for Dodge Charger Torque Converter

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$160–$300104 listings
Grade CVisible wear$300–$30010 listings
Grade XUngraded$250–$25012 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $160–$300 overall range

Regional supply

Where the Dodge Charger torque converter is listed

We found priced Dodge Charger torque converter listings at 25 salvage yards across 16 states. Pennsylvania supplies the most, with 46 listings (29% of the total) from 3 yards. Location matters: yards in Indiana ask a median $100, while Pennsylvania yards ask $250, 150% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
Pennsylvania463$250
Indiana182$100-60%
Missouri164$199-20%
New York121$225-10%
Illinois123$219-12%

States with at least 10 priced listings. % is versus the $250 national median.

Replacement cost

What is the Dodge Charger torque converter replacement cost?

ESTIMATE
Used part
$250
Dodge Charger median asking price
Labor
$475–$1,500
5–10 hours at $95–$150/hr
Estimated total
$725–$1,750
median used part + labor

Labor is a typical independent-shop range for torque converter replacement, not a quote for your vehicle; it does not include transmission fluid and filter, since the transmission must be removed to access the converter. The part price is the live median from the salvage-yard listings on this page. Full torque converter replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Dodge Charger Torque Converter

$

Current avg: $244 — we suggest $207 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2023)

3.6L; Pursuit; (6-220)

4 listings
Interchange 2016–2021$250$225 – $250

GT & SXT

4 listings
Interchange 2016–2021$250$225 – $250

5.7L; Pursuit; (8-345)

1 listings
Interchange 2022–2023$300$300 – $300

R/T

1 listings
Interchange 2022–2023$300$300 – $300

Model-year comparison

What does a Dodge Charger torque converter cost by year?

$197$219$242$264$287201520162017201820192020202120222023
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Dodge Charger torque converter cost?

Asking prices for a used Dodge Charger torque converter sit in a fairly tight band around the $250 median, so most quotes far outside it deserve a second look.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, 3.6L; Pursuit; (6-220), lists at a $250 median, while R/T commands $300, a 20% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2017 units carry the lowest median at $219, while 2019 tops the table at $273. Parts from 2016–2021 are interchangeable, so if the 2017 fits your vehicle, it offers the best value across 4 compatible years.

Against comparable vehicles, the Dodge Charger sits 14% above the Jeep Compass ($219), 16% above the Jeep Cherokee ($215), and 2% above the Volkswagen Atlas ($244) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used torque converter: what to check

  1. Inspect hub neck snout and drive notch: Check the small transmission pump drive neck for deep grooves, burrs, or rounded drive blade notches.
  2. Verify internal stator one-way clutch operation: Insert a spline tool into the stator hub to confirm it locks firmly in one direction and spins freely in the other.
  3. Check starter ring gear tooth condition: Examine outer perimeter ring gear teeth for chipped, rounded, or ground-down teeth caused by starter engagement failures.
  4. Confirm pilot hub diameter and bolt pattern: Measure pilot stub diameter and bolt circle spacing to match your engine crankshaft and flexplate layout.
  5. Fully seat converter splines before transmission bolting: Spin and push the converter until it drops past two distinct spline steps into the oil pump drive.

Keep browsing this vehicle

What other Dodge Charger parts are priced?

Price comparisons

Compare Dodge Charger torque converter prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Dodge Charger torque converter FAQ

How much is a used torque converter for a Dodge Charger?

The median asking price is $250 across 126 priced listings from 25 yards. Grade-A units, the cleanest stock, have a median of $250. 2017 is the cheapest model year we track, with a median of $219.

How much does it cost to replace a Dodge Charger torque converter?

Using a used part, a Dodge Charger torque converter replacement typically runs $725–$1,750 all-in: the median used torque converter for this model lists at $250, and independent-shop labor for torque converter replacement typically takes 5–10 hours at $95–$150/hr ($475–$1,500). The labor figure does not include transmission fluid and filter, since the transmission must be removed to access the converter. Labor is a national part-level estimate, not a quote for your vehicle.

Which Dodge Charger model years does this price guide cover?

This guide currently has year-level pricing for 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Dodge Charger torque converter years are interchangeable?

Salvage-yard interchange data links Dodge Charger torque converter fitments across 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2019, 2021, 2022, 2023. Searching all 12 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Dodge Charger Torque Converter Cost — From $160 to $300