GMC Canyon torque converter price snapshot
- Low
- $248
- Average
- $262
- High
- $275
Vehicle-specific price guide
How much is a used GMC Canyon torque converter?
Asking prices from 2 salvage yards in 2 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 21, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the GMC Canyon torque converter
What the torque converter does, common failure signs, and prices across all vehicles: used torque converter price guide →
Also known asTransmission Torque ConverterTorque Convertor
Price summary
A used GMC Canyon torque converter costs $248 to $275, with a median asking price of $275. Based on 10 priced salvage yard listings across the US, compatible across 2015–2019 (2 model years), updated Oct 21, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$248
USD
Condition comparison
Price by part grade
Grade AClean / low wear$248–$2485 listings
Grade XUngraded$275–$2755 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $248–$248 | 5 | |
| Grade XUngraded | $275–$275 | 5 |
Median by grade
Grade price comparison
Grade A$248
Ungraded$275
Median asking price by seller-reported condition grade · $248–$275 overall range
Replacement cost
What is the GMC Canyon torque converter replacement cost?
- Used part
- $275
- GMC Canyon median asking price
- Labor
- $475–$1,500
- 5–10 hours at $95–$150/hr
- Estimated total
- $750–$1,775
- median used part + labor
Labor is a typical independent-shop range for torque converter replacement, not a quote for your vehicle; it does not include transmission fluid and filter, since the transmission must be removed to access the converter. The part price is the live median from the salvage-yard listings on this page. Full torque converter replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
3.6L; AT4, Denali, Elevation & Elevation Standard; (6-222)
2 listings$275$248 – $275Model-year comparison
What does a GMC Canyon torque converter cost by year?
Market analysis
How much does a used GMC Canyon torque converter cost?
Asking prices for a used GMC Canyon torque converter sit in a fairly tight band around the $275 median, so most quotes far outside it deserve a second look.
Against comparable vehicles, the GMC Canyon sits 26% above the Jeep Compass ($219), 28% above the Jeep Cherokee ($215), and 13% above the Volkswagen Atlas ($244) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used torque converter: what to check
- Inspect hub neck snout and drive notch: Check the small transmission pump drive neck for deep grooves, burrs, or rounded drive blade notches.
- Verify internal stator one-way clutch operation: Insert a spline tool into the stator hub to confirm it locks firmly in one direction and spins freely in the other.
- Check starter ring gear tooth condition: Examine outer perimeter ring gear teeth for chipped, rounded, or ground-down teeth caused by starter engagement failures.
- Confirm pilot hub diameter and bolt pattern: Measure pilot stub diameter and bolt circle spacing to match your engine crankshaft and flexplate layout.
- Fully seat converter splines before transmission bolting: Spin and push the converter until it drops past two distinct spline steps into the oil pump drive.
Keep browsing this vehicle
What other GMC Canyon parts are priced?
01wide ±198%
Transmission Control Module
$106median
$20$440
02wide ±290%
Car Radio
$120median
$25$722
03wide ±174%
Front Seat
$211median
$61$795
04wide ±214%
Air Bag
$223median
$45$1,000
05wide ±120%
Drive Shaft
$191median
$60$520
06wide ±201%
Wheels
$200median
$47$850
07wide ±156%
Side Mirror
$186median
$41$620
08wide ±115%
Transmission
$1,975median
$544$5,087
09wide ±79%
Quarter Panel
$606median
$266$1,225
10wide ±146%
Center Console
$159median
$35$500
11wide ±132%
AC Condenser
$159median
$40$460
12wide ±265%
Fuel Pump
$118median
$25$650
Price comparisons
Compare GMC Canyon torque converter prices
Torque Convertercompare
JeepCompassvsGMCCanyon
Compass$219
Canyon$275
$56 diff780 listings
Torque ConvertercompareJeepCherokeevsGMCCanyon
Cherokee$215
Canyon$275
$60 diff530 listings
Torque ConvertercompareVolkswagenAtlasvsGMCCanyon
Atlas$244
Canyon$275
$31 diff528 listings
Torque ConvertercompareFordF150vsGMCCanyon
F150$512
Canyon$275
$237 diff446 listings
Torque ConvertercompareJeepRenegadevsGMCCanyon
Renegade$206
Canyon$275
$69 diff380 listings
Torque ConvertercompareChevyCruzevsGMCCanyon
Cruze$138
Canyon$275
$137 diff351 listings
Compare fitments
What do similar vehicles charge for this part?
Acuraspread ±41%
Acura ILX
$305median
$90$340
Acurawide ±69%
Acura MDX
$400median
$199$750
Acuraspread ±33%
Acura RDX
$450median
$450$750
Acurawide ±62%
Acura TLX
$399median
$199$695
Audispread ±33%
Audi A6
$400median
$250$511
Auditight ±18%
Audi Q3
$161median
$136$195
Auditight ±18%
Audi Q5
$444median
$349$511
Audispread ±35%
Audi Q7
$250median
$175$350
GMCspread ±50%
GMC Acadia
$299median
$150$449
GMCspread ±40%
GMC Sierra 1500
$450median
$142$500
GMCwide ±75%
GMC Terrain
$200median
$100$400
GMC
GMC Yukon
Price data updating
Common questions
GMC Canyon torque converter FAQ
How much is a used torque converter for a GMC Canyon?
The median asking price is $275 across 10 priced listings from 2 yards. Grade-A units, the cleanest stock, have a median of $248. 2021 is the cheapest model year we track, with a median of $275.
How much does it cost to replace a GMC Canyon torque converter?
Using a used part, a GMC Canyon torque converter replacement typically runs $750–$1,775 all-in: the median used torque converter for this model lists at $275, and independent-shop labor for torque converter replacement typically takes 5–10 hours at $95–$150/hr ($475–$1,500). The labor figure does not include transmission fluid and filter, since the transmission must be removed to access the converter. Labor is a national part-level estimate, not a quote for your vehicle.
Which GMC Canyon model years does this price guide cover?
This guide currently has year-level pricing for 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which GMC Canyon torque converter years are interchangeable?
Salvage-yard interchange data links GMC Canyon torque converter fitments across 2015, 2019. Searching all 2 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.