Ram 2500 torque converter price snapshot
- Low
- $106
- Average
- $542
- High
- $900
Vehicle-specific price guide
How much is a used Ram 2500 torque converter?
Asking prices from 17 salvage yards in 11 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 21, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Ram 2500 torque converter
What the torque converter does, common failure signs, and prices across all vehicles: used torque converter price guide →
Also known asTransmission Torque ConverterTorque Convertor
Price summary
A used Ram 2500 torque converter costs $106 to $900, with a median asking price of $400. Based on 26 priced salvage yard listings across the US, compatible across 2015–2025 (8 model years), updated Oct 21, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$437
USD
Condition comparison
Price by part grade
Grade AClean / low wear$250–$90021 listings
Grade XUngraded$106–$4005 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $250–$900 | 21 | |
| Grade XUngraded | $106–$400 | 5 |
Median by grade
Grade price comparison
Grade A$437
Ungraded$325
Median asking price by seller-reported condition grade · $106–$900 overall range
Replacement cost
What is the Ram 2500 torque converter replacement cost?
- Used part
- $400
- Ram 2500 median asking price
- Labor
- $475–$1,500
- 5–10 hours at $95–$150/hr
- Estimated total
- $875–$1,900
- median used part + labor
Labor is a typical independent-shop range for torque converter replacement, not a quote for your vehicle; it does not include transmission fluid and filter, since the transmission must be removed to access the converter. The part price is the live median from the salvage-yard listings on this page. Full torque converter replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
6.7L
1 listings$900$900 – $900Model-year comparison
What does a Ram 2500 torque converter cost by year?
20251 listings$900$900 – $90020243 listingsFits 2 years$899$899 – $89920222 listingsFits 3 years$900$106 – $90020212 listingsFits 3 years$900$106 – $90020202 listingsFits 2 years$899$899 – $899201912 listingsFits 2 years$345$250 – $437201810 listingsFits 2 years$900$900 – $90020178 listingsFits 2 yearsNo priced listings yet20168 listingsFits 2 years$900$900 – $90020157 listings$400$325 – $400
Market analysis
How much does a used Ram 2500 torque converter cost?
Asking prices for a used Ram 2500 torque converter are unusually spread out: the top listing asks about 8 times what the cheapest does, so which unit you pick matters more than the median.
Model year matters too: 2019 units carry the lowest median at $345, while 2016 tops the table at $900. Parts from 2018–2019 are interchangeable, so if the 2019 fits your vehicle, it offers the best value across 2 compatible years.
Against comparable vehicles, the Ram 2500 sits 83% above the Jeep Compass ($219), 86% above the Jeep Cherokee ($215), and 64% above the Volkswagen Atlas ($244) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used torque converter: what to check
- Inspect hub neck snout and drive notch: Check the small transmission pump drive neck for deep grooves, burrs, or rounded drive blade notches.
- Verify internal stator one-way clutch operation: Insert a spline tool into the stator hub to confirm it locks firmly in one direction and spins freely in the other.
- Check starter ring gear tooth condition: Examine outer perimeter ring gear teeth for chipped, rounded, or ground-down teeth caused by starter engagement failures.
- Confirm pilot hub diameter and bolt pattern: Measure pilot stub diameter and bolt circle spacing to match your engine crankshaft and flexplate layout.
- Fully seat converter splines before transmission bolting: Spin and push the converter until it drops past two distinct spline steps into the oil pump drive.
Keep browsing this vehicle
What other Ram 2500 parts are priced?
01wide ±247%
Front Seat
$180median
$46$934
02wide ±186%
Transmission Control Module
$153median
$30$600
03wide ±283%
Side Mirror
$292median
$50$1,700
04wide ±237%
Wheels
$253median
$50$1,250
05wide ±200%
Drive Shaft
$295median
$70$1,248
06wide ±287%
Car Radio
$182median
$35$1,080
07wide ±208%
Grille
$600median
$100$2,600
08wide ±114%
Door Assembly
$650median
$110$1,597
09wide ±197%
Tail Light
$250median
$44$1,027
10wide ±107%
Headlight Assembly
$600median
$106$1,385
11wide ±114%
Window Regulator
$166median
$28$405
12wide ±132%
Fuel Tank
$220median
$70$650
Price comparisons
Compare Ram 2500 torque converter prices
Torque Convertercompare
JeepCompassvsRam2500
Compass$219
2500$400
$181 diff796 listings
Torque ConvertercompareJeepCherokeevsRam2500
Cherokee$215
2500$400
$185 diff546 listings
Torque ConvertercompareVolkswagenAtlasvsRam2500
Atlas$244
2500$400
$156 diff544 listings
Torque ConvertercompareFordF150vsRam2500
F150$512
2500$400
$112 diff462 listings
Torque ConvertercompareFordExplorervsRam2500
Explorer$250
2500$400
$150 diff339 listings
Torque ConvertercompareChevyEquinoxvsRam2500
Equinox$167
2500$400
$233 diff319 listings
Compare fitments
What do similar vehicles charge for this part?
Acuraspread ±41%
Acura ILX
$305median
$90$340
Acurawide ±69%
Acura MDX
$400median
$199$750
Acuraspread ±33%
Acura RDX
$450median
$450$750
Acurawide ±62%
Acura TLX
$399median
$199$695
Audispread ±33%
Audi A6
$400median
$250$511
Auditight ±18%
Audi Q3
$161median
$136$195
Auditight ±18%
Audi Q5
$444median
$349$511
Audispread ±35%
Audi Q7
$250median
$175$350
BMWspread ±33%
BMW X1
$299median
$250$448
BMWwide ±63%
BMW X3
$250median
$132$449
Ramwide ±109%
Ram 1500
$345median
$150$900
Ramwide ±107%
Ram 3500
$372median
$106$900
Common questions
Ram 2500 torque converter FAQ
How much is a used torque converter for a Ram 2500?
The median asking price is $400 across 26 priced listings from 17 yards. Grade-A units, the cleanest stock, have a median of $437. 2019 is the cheapest model year we track, with a median of $345.
How much does it cost to replace a Ram 2500 torque converter?
Using a used part, a Ram 2500 torque converter replacement typically runs $875–$1,900 all-in: the median used torque converter for this model lists at $400, and independent-shop labor for torque converter replacement typically takes 5–10 hours at $95–$150/hr ($475–$1,500). The labor figure does not include transmission fluid and filter, since the transmission must be removed to access the converter. Labor is a national part-level estimate, not a quote for your vehicle.
Which Ram 2500 model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2024, 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Ram 2500 torque converter years are interchangeable?
Salvage-yard interchange data links Ram 2500 torque converter fitments across 2015, 2016, 2017, 2018, 2019, 2020, 2024, 2025. Searching all 8 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.