Used Mercedes GLE Class torque converter from a salvage yard

Vehicle-specific price guide

How much is a used Mercedes GLE Class torque converter?

Asking prices from 12 salvage yards in 8 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 22, 2026
Moderate coverage44 priced of 159 observed4 variantsMethodology v2.1 →

Part overview

About the Mercedes GLE Class torque converter

What the torque converter does, common failure signs, and prices across all vehicles: used torque converter price guide →

Also known asTransmission Torque ConverterTorque Convertor
Price summary

A used Mercedes GLE Class torque converter costs $299 to $580, with a median asking price of $440. Based on 44 priced salvage yard listings across the US, compatible across 2017–2020 (2 model years), updated Oct 22, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$299
Grade B (good)$484

Mercedes GLE Class torque converter price snapshot

USD
Low
$299
Average
$439
High
$580
159 listings observed · 44 priced7d ago· How we price·

Report incorrect price

Reporting price for Mercedes GLE Class Torque Converter

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$299–$2994 listings
Grade BStandard used$309–$58040 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $299–$580 overall range

Replacement cost

What is the Mercedes GLE Class torque converter replacement cost?

ESTIMATE
Used part
$440
Mercedes GLE Class median asking price
Labor
$475–$1,500
5–10 hours at $95–$150/hr
Estimated total
$915–$1,940
median used part + labor

Labor is a typical independent-shop range for torque converter replacement, not a quote for your vehicle; it does not include transmission fluid and filter, since the transmission must be removed to access the converter. The part price is the live median from the salvage-yard listings on this page. Full torque converter replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Mercedes GLE Class Torque Converter

$

Current avg: $439 — we suggest $373 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2021)

GLE350; 4Matic & base model10 listings$484$309 – $580

GLE580; 4Matic

1 listings
$299$299 – $299

GLE63 AMG S; 4Matic

1 listings
$299$299 – $299

GLE63 AMG S SUV; 4Matic+

1 listings
$299$299 – $299

Model-year comparison

What does a Mercedes GLE Class torque converter cost by year?

Market analysis

How much does a used Mercedes GLE Class torque converter cost?

Asking prices for a used Mercedes GLE Class torque converter sit in a fairly tight band around the $440 median, so most quotes far outside it deserve a second look.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, GLE580; 4Matic, lists at a $299 median, while GLE350; 4Matic & base model commands $484, a 62% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Against comparable vehicles, the Mercedes GLE Class sits 101% above the Jeep Compass ($219), 105% above the Jeep Cherokee ($215), and 80% above the Volkswagen Atlas ($244) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used torque converter: what to check

  1. Inspect hub neck snout and drive notch: Check the small transmission pump drive neck for deep grooves, burrs, or rounded drive blade notches.
  2. Verify internal stator one-way clutch operation: Insert a spline tool into the stator hub to confirm it locks firmly in one direction and spins freely in the other.
  3. Check starter ring gear tooth condition: Examine outer perimeter ring gear teeth for chipped, rounded, or ground-down teeth caused by starter engagement failures.
  4. Confirm pilot hub diameter and bolt pattern: Measure pilot stub diameter and bolt circle spacing to match your engine crankshaft and flexplate layout.
  5. Fully seat converter splines before transmission bolting: Spin and push the converter until it drops past two distinct spline steps into the oil pump drive.

Keep browsing this vehicle

What other Mercedes GLE Class parts are priced?

Price comparisons

Compare Mercedes GLE Class torque converter prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Mercedes GLE Class torque converter FAQ

How much is a used torque converter for a Mercedes GLE Class?

The median asking price is $440 across 44 priced listings from 12 yards. Grade-A units, the cleanest stock, have a median of $299. 2021 is the cheapest model year we track, with a median of $440.

How much does it cost to replace a Mercedes GLE Class torque converter?

Using a used part, a Mercedes GLE Class torque converter replacement typically runs $915–$1,940 all-in: the median used torque converter for this model lists at $440, and independent-shop labor for torque converter replacement typically takes 5–10 hours at $95–$150/hr ($475–$1,500). The labor figure does not include transmission fluid and filter, since the transmission must be removed to access the converter. Labor is a national part-level estimate, not a quote for your vehicle.

Which Mercedes GLE Class model years does this price guide cover?

This guide currently has year-level pricing for 2021, 2020, 2019, 2018, 2017, 2016. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Mercedes GLE Class torque converter years are interchangeable?

Salvage-yard interchange data links Mercedes GLE Class torque converter fitments across 2017, 2020. Searching all 2 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Mercedes GLE Class Torque Converter Cost — From $299 to $580