Used Mercedes S Class torque converter from a salvage yard

Vehicle-specific price guide

How much is a used Mercedes S Class torque converter?

Asking prices from 16 salvage yards in 10 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 14, 2026
Moderate coverage59 priced of 91 observed2 variantsMethodology v2.1 →

Part overview

About the Mercedes S Class torque converter

What the torque converter does, common failure signs, and prices across all vehicles: used torque converter price guide →

Also known asTransmission Torque ConverterTorque Convertor
Price summary

A used Mercedes S Class torque converter costs $299 to $909, with a median asking price of $755. Based on 59 priced salvage yard listings across the US, compatible across 2015–2020 (4 model years), updated Oct 14, 2026. Prices exclude shipping, core charges, and installation.

Grade A (excellent)$300
Grade B (good)$814

Mercedes S Class torque converter price snapshot

USD
Low
$299
Average
$633
High
$909
91 listings observed · 59 priced15d ago· How we price·

Report incorrect price

Reporting price for Mercedes S Class Torque Converter

Reason

Condition comparison

Price by part grade

Grade AClean / low wear$299–$50421 listings
Grade BStandard used$595–$90938 listings

Median by grade

Grade price comparison

Median asking price by seller-reported condition grade · $299–$909 overall range

Regional supply

Where the Mercedes S Class torque converter is listed

We found priced Mercedes S Class torque converter listings at 16 salvage yards across 10 states. South Carolina supplies the most, with 10 listings (17% of the total) from 2 yards. Location matters: yards in South Carolina ask a median $595, while Florida yards ask $695, 17% more for the same part. Shipping usually costs less than that gap for smaller parts, so it can pay to buy out of state.

StateListingsYardsMedian ask
South Carolina102$595-21%
Florida102$695-8%

States with at least 10 priced listings. % is versus the $755 national median.

Replacement cost

What is the Mercedes S Class torque converter replacement cost?

ESTIMATE
Used part
$755
Mercedes S Class median asking price
Labor
$475–$1,500
5–10 hours at $95–$150/hr
Estimated total
$1,230–$2,255
median used part + labor

Labor is a typical independent-shop range for torque converter replacement, not a quote for your vehicle; it does not include transmission fluid and filter, since the transmission must be removed to access the converter. The part price is the live median from the salvage-yard listings on this page. Full torque converter replacement cost breakdown

Sources
  1. Labor time estimates: Part Price Guide labor database

Set price alert

Alert for Mercedes S Class Torque Converter

$

Current avg: $633 — we suggest $538 (15% below)

Condition grade (optional)

Fitment matters

Price by trim & variant (2021)

S63 AMG; 4Matic10 listings$814$595 – $909

S560; 4Matic & base model

1 listings
$299$299 – $299

Model-year comparison

What does a Mercedes S Class torque converter cost by year?

$360$474$587$701$815201520172018201920202021
Median asking price by model year · salvage yard listing data

Market analysis

How much does a used Mercedes S Class torque converter cost?

Asking prices for a used Mercedes S Class torque converter are unusually spread out: the top listing asks about 3 times what the cheapest does, so which unit you pick matters more than the median.

Fitment variant moves the price more than most buyers expect. The most affordable variant we track, S560; 4Matic & base model, lists at a $299 median, while S63 AMG; 4Matic commands $814, a 172% gap inside the same part category. Confirm which variant your VIN requires before comparing quotes.

Model year matters too: 2015 units carry the lowest median at $400, while 2018 tops the table at $776. Year-level pages linked in the table above break each one down by grade and variant.

Against comparable vehicles, the Mercedes S Class sits 245% above the Jeep Compass ($219), 251% above the Jeep Cherokee ($215), and 209% above the Volkswagen Atlas ($244) for the same part. The “similar vehicles” cards below open each comparison guide.

Buying a used torque converter: what to check

  1. Inspect hub neck snout and drive notch: Check the small transmission pump drive neck for deep grooves, burrs, or rounded drive blade notches.
  2. Verify internal stator one-way clutch operation: Insert a spline tool into the stator hub to confirm it locks firmly in one direction and spins freely in the other.
  3. Check starter ring gear tooth condition: Examine outer perimeter ring gear teeth for chipped, rounded, or ground-down teeth caused by starter engagement failures.
  4. Confirm pilot hub diameter and bolt pattern: Measure pilot stub diameter and bolt circle spacing to match your engine crankshaft and flexplate layout.
  5. Fully seat converter splines before transmission bolting: Spin and push the converter until it drops past two distinct spline steps into the oil pump drive.

Keep browsing this vehicle

What other Mercedes S Class parts are priced?

Price comparisons

Compare Mercedes S Class torque converter prices

Compare fitments

What do similar vehicles charge for this part?

Common questions

Mercedes S Class torque converter FAQ

How much is a used torque converter for a Mercedes S Class?

The median asking price is $755 across 59 priced listings from 16 yards. Grade-A units, the cleanest stock, have a median of $300. 2015 is the cheapest model year we track, with a median of $400.

How much does it cost to replace a Mercedes S Class torque converter?

Using a used part, a Mercedes S Class torque converter replacement typically runs $1,230–$2,255 all-in: the median used torque converter for this model lists at $755, and independent-shop labor for torque converter replacement typically takes 5–10 hours at $95–$150/hr ($475–$1,500). The labor figure does not include transmission fluid and filter, since the transmission must be removed to access the converter. Labor is a national part-level estimate, not a quote for your vehicle.

Which Mercedes S Class model years does this price guide cover?

This guide currently has year-level pricing for 2021, 2020, 2019, 2018, 2017, 2016, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.

Which Mercedes S Class torque converter years are interchangeable?

Salvage-yard interchange data links Mercedes S Class torque converter fitments across 2015, 2017, 2019, 2020. Searching all 4 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.

Used Mercedes S Class Torque Converter Cost — From $299 to $909