Chrysler Pacifica torque converter price snapshot
- Low
- $95
- Average
- $187
- High
- $259
Vehicle-specific price guide
How much is a used Chrysler Pacifica torque converter?
Asking prices from 17 salvage yards in 11 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 21, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Chrysler Pacifica torque converter
What the torque converter does, common failure signs, and prices across all vehicles: used torque converter price guide →
Also known asTransmission Torque ConverterTorque Convertor
Price summary
A used Chrysler Pacifica torque converter costs $95 to $259, with a median asking price of $189. Based on 66 priced salvage yard listings across the US, compatible across 2016–2025 (6 model years), updated Oct 21, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$189
Grade B (good)$230
USD
Condition comparison
Price by part grade
Grade AClean / low wear$95–$25964 listings
Grade BStandard used$230–$2302 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $95–$259 | 64 | |
| Grade BStandard used | $230–$230 | 2 |
Median by grade
Grade price comparison
Grade A$189
Grade B$230
Median asking price by seller-reported condition grade · $95–$259 overall range
Regional supply
Where the Chrysler Pacifica torque converter is listed
We found priced Chrysler Pacifica torque converter listings at 17 salvage yards across 11 states. Missouri supplies the most, with 16 listings (24% of the total) from 4 yards. Asking prices are fairly even across the busiest states, from $168 in Missouri to $189 in Illinois, so a nearby yard is usually the better buy once shipping is counted.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Missouri | 16 | 4 | $168-11% |
| Illinois | 12 | 3 | $189 |
States with at least 10 priced listings. % is versus the $189 national median.
Replacement cost
What is the Chrysler Pacifica torque converter replacement cost?
- Used part
- $189
- Chrysler Pacifica median asking price
- Labor
- $475–$1,500
- 5–10 hours at $95–$150/hr
- Estimated total
- $665–$1,690
- median used part + labor
Labor is a typical independent-shop range for torque converter replacement, not a quote for your vehicle; it does not include transmission fluid and filter, since the transmission must be removed to access the converter. The part price is the live median from the salvage-yard listings on this page. Full torque converter replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Non-Interchange search using Chrysler Pacifica and similar models
1 listings$230$230 – $230Non-Interchange search using only Chrysler Pacifica
1 listings$230$230 – $230Model-year comparison
What does a Chrysler Pacifica torque converter cost by year?
Market analysis
How much does a used Chrysler Pacifica torque converter cost?
Asking prices for a used Chrysler Pacifica torque converter sit in a fairly tight band around the $189 median, so most quotes far outside it deserve a second look.
Model year matters too: 2017 units carry the lowest median at $189, while 2022 tops the table at $230. Parts from 2016–2020 are interchangeable, so if the 2017 fits your vehicle, it offers the best value across 4 compatible years.
Against comparable vehicles, the Chrysler Pacifica sits 14% below the Jeep Compass ($219), 12% below the Jeep Cherokee ($215), and 23% below the Volkswagen Atlas ($244) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used torque converter: what to check
- Inspect hub neck snout and drive notch: Check the small transmission pump drive neck for deep grooves, burrs, or rounded drive blade notches.
- Verify internal stator one-way clutch operation: Insert a spline tool into the stator hub to confirm it locks firmly in one direction and spins freely in the other.
- Check starter ring gear tooth condition: Examine outer perimeter ring gear teeth for chipped, rounded, or ground-down teeth caused by starter engagement failures.
- Confirm pilot hub diameter and bolt pattern: Measure pilot stub diameter and bolt circle spacing to match your engine crankshaft and flexplate layout.
- Fully seat converter splines before transmission bolting: Spin and push the converter until it drops past two distinct spline steps into the oil pump drive.
Keep browsing this vehicle
What other Chrysler Pacifica parts are priced?
01wide ±224%
Transmission Control Module
$116median
$25$545
02wide ±175%
Side Mirror
$232median
$50$860
03wide ±137%
Front Seat
$175median
$50$528
04wide ±184%
Car Radio
$190median
$49$750
05wide ±148%
Strut
$96median
$36$320
06wide ±285%
Air Bag
$143median
$35$850
07wide ±125%
Headlight Assembly
$424median
$110$1,170
08wide ±163%
Wheels
$192median
$45$670
09wide ±249%
Tail Light
$150median
$25$773
10wide ±154%
Rear Bumper Assembly
$482median
$125$1,606
11wide ±146%
Grille
$167median
$38$524
12wide ±204%
Axle Shaft
$136median
$40$594
Price comparisons
Compare Chrysler Pacifica torque converter prices
Torque Convertercompare
JeepCompassvsChryslerPacifica
Compass$219
Pacifica$189
$30 diff836 listings
Torque ConvertercompareJeepCherokeevsChryslerPacifica
Cherokee$215
Pacifica$189
$26 diff586 listings
Torque ConvertercompareVolkswagenAtlasvsChryslerPacifica
Atlas$244
Pacifica$189
$55 diff584 listings
Torque ConvertercompareFordF150vsChryslerPacifica
F150$512
Pacifica$189
$323 diff502 listings
Torque ConvertercompareJeepRenegadevsChryslerPacifica
Renegade$206
Pacifica$189
$17 diff436 listings
Torque ConvertercompareChevyCruzevsChryslerPacifica
Cruze$138
Pacifica$189
$51 diff407 listings
Compare fitments
What do similar vehicles charge for this part?
Acuraspread ±41%
Acura ILX
$305median
$90$340
Acurawide ±69%
Acura MDX
$400median
$199$750
Acuraspread ±33%
Acura RDX
$450median
$450$750
Acurawide ±62%
Acura TLX
$399median
$199$695
Audispread ±33%
Audi A6
$400median
$250$511
Auditight ±18%
Audi Q3
$161median
$136$195
Auditight ±18%
Audi Q5
$444median
$349$511
Audispread ±35%
Audi Q7
$250median
$175$350
BMWspread ±33%
BMW X1
$299median
$250$448
BMWwide ±63%
BMW X3
$250median
$132$449
Chryslerwide ±151%
Chrysler 300
$250median
$209$963
Chrysler
Chrysler Voyager
Price data updating
Common questions
Chrysler Pacifica torque converter FAQ
How much is a used torque converter for a Chrysler Pacifica?
The median asking price is $189 across 66 priced listings from 17 yards. Grade-A units, the cleanest stock, have a median of $189. 2021 is the cheapest model year we track, with a median of $189.
How much does it cost to replace a Chrysler Pacifica torque converter?
Using a used part, a Chrysler Pacifica torque converter replacement typically runs $665–$1,690 all-in: the median used torque converter for this model lists at $189, and independent-shop labor for torque converter replacement typically takes 5–10 hours at $95–$150/hr ($475–$1,500). The labor figure does not include transmission fluid and filter, since the transmission must be removed to access the converter. Labor is a national part-level estimate, not a quote for your vehicle.
Which Chrysler Pacifica model years does this price guide cover?
This guide currently has year-level pricing for 2025, 2022, 2021, 2020, 2018, 2017. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Chrysler Pacifica torque converter years are interchangeable?
Salvage-yard interchange data links Chrysler Pacifica torque converter fitments across 2016, 2017, 2019, 2020, 2022, 2025. Searching all 6 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.