Chrysler 300 torque converter price snapshot
- Low
- $225
- Average
- $443
- High
- $963
Vehicle-specific price guide
How much is a used Chrysler 300 torque converter?
Asking prices from 4 salvage yards in 2 states, broken down by model year, condition grade, and fitment variant.
SKWritten bySaurabh Kumar · Co-Founder & CTO
SK
Saurabh Kumar
Co-Founder & CTO, Part Price Guide
Built the pricing pipeline that collects and normalizes used OEM part listings from salvage yards and online marketplaces across the US.
ASReviewed byAmbika Sharma · Co-Founder & COO
Last updatedOct 29, 2026AS
Ambika Sharma
Co-Founder & COO, Part Price Guide
12 years of project management and technical operations experience. Reviews price guides for sample size, fitment accuracy, and data freshness.
Part overview
About the Chrysler 300 torque converter
What the torque converter does, common failure signs, and prices across all vehicles: used torque converter price guide →
Also known asTransmission Torque ConverterTorque Convertor
Price summary
A used Chrysler 300 torque converter costs $225 to $963, with a median asking price of $250. Based on 54 priced salvage yard listings across the US, compatible across 2014–2021 (6 model years), updated Oct 29, 2026. Prices exclude shipping, core charges, and installation.
Grade A (excellent)$250
Grade B (good)$713
USD
Condition comparison
Price by part grade
Grade AClean / low wear$225–$96334 listings
Grade BStandard used$712–$71410 listings
Grade XUngraded$250–$25010 listings
| Grade | Price range | Relative range | Listings |
|---|---|---|---|
| Grade AClean / low wear | $225–$963 | 34 | |
| Grade BStandard used | $712–$714 | 10 | |
| Grade XUngraded | $250–$250 | 10 |
Median by grade
Grade price comparison
Grade A$250
Grade B$713
Ungraded$250
Median asking price by seller-reported condition grade · $225–$963 overall range
Regional supply
Where the Chrysler 300 torque converter is listed
We found priced Chrysler 300 torque converter listings at 4 salvage yards across 2 states. Pennsylvania supplies the most, with 20 listings (37% of the total) from 2 yards. Asking prices are fairly even across the busiest states, from $225 in New York to $250 in Pennsylvania, so a nearby yard is usually the better buy once shipping is counted.
| State | Listings | Yards | Median ask |
|---|---|---|---|
| Pennsylvania | 20 | 2 | $250 |
| New York | 10 | 1 | $225-10% |
States with at least 10 priced listings. % is versus the $250 national median.
Replacement cost
What is the Chrysler 300 torque converter replacement cost?
- Used part
- $250
- Chrysler 300 median asking price
- Labor
- $475–$1,500
- 5–10 hours at $95–$150/hr
- Estimated total
- $725–$1,750
- median used part + labor
Labor is a typical independent-shop range for torque converter replacement, not a quote for your vehicle; it does not include transmission fluid and filter, since the transmission must be removed to access the converter. The part price is the live median from the salvage-yard listings on this page. Full torque converter replacement cost breakdown
Sources
- Labor time estimates: Part Price Guide labor database
Model-year comparison
What does a Chrysler 300 torque converter cost by year?
Market analysis
How much does a used Chrysler 300 torque converter cost?
Asking prices for a used Chrysler 300 torque converter are unusually spread out: the top listing asks about 4 times what the cheapest does, so which unit you pick matters more than the median.
Model year matters too: 2015 units carry the lowest median at $250, while 2019 tops the table at $570. Parts from 2014–2021 are interchangeable, so if the 2015 fits your vehicle, it offers the best value across 5 compatible years.
Against comparable vehicles, the Chrysler 300 sits 14% above the Jeep Compass ($219), 16% above the Jeep Cherokee ($215), and 2% above the Volkswagen Atlas ($244) for the same part. The “similar vehicles” cards below open each comparison guide.
Buying a used torque converter: what to check
- Inspect hub neck snout and drive notch: Check the small transmission pump drive neck for deep grooves, burrs, or rounded drive blade notches.
- Verify internal stator one-way clutch operation: Insert a spline tool into the stator hub to confirm it locks firmly in one direction and spins freely in the other.
- Check starter ring gear tooth condition: Examine outer perimeter ring gear teeth for chipped, rounded, or ground-down teeth caused by starter engagement failures.
- Confirm pilot hub diameter and bolt pattern: Measure pilot stub diameter and bolt circle spacing to match your engine crankshaft and flexplate layout.
- Fully seat converter splines before transmission bolting: Spin and push the converter until it drops past two distinct spline steps into the oil pump drive.
Keep browsing this vehicle
What other Chrysler 300 parts are priced?
01wide ±176%
Wheels
$175median
$45$662
02wide ±150%
Control Arm
$80median
$30$270
03wide ±207%
Grille
$132median
$22$569
04wide ±194%
Side Mirror
$135median
$35$560
05wide ±126%
Transmission Control Module
$125median
$21$335
06wide ±278%
Brake Caliper
$75median
$25$442
07wide ±111%
Steering Column
$171median
$40$420
08wide ±115%
Headlight Assembly
$418median
$142$1,100
09wide ±230%
Axle Shaft
$100median
$34$493
10wide ±222%
Fog Light
$146median
$25$672
11wide ±261%
Car Radio
$207median
$50$1,131
12wide ±142%
Front Seat
$176median
$50$550
Price comparisons
Compare Chrysler 300 torque converter prices
Torque Convertercompare
JeepCompassvsChrysler300
Compass$219
300$250
$31 diff824 listings
Torque ConvertercompareJeepCherokeevsChrysler300
Cherokee$215
300$250
$35 diff574 listings
Torque ConvertercompareVolkswagenAtlasvsChrysler300
Atlas$244
300$250
$6 diff572 listings
Torque ConvertercompareFordF150vsChrysler300
F150$512
300$250
$262 diff490 listings
Torque ConvertercompareJeepRenegadevsChrysler300
Renegade$206
300$250
$44 diff424 listings
Torque ConvertercompareFordExplorervsChrysler300
Explorer$250
300$250
$0 diff367 listings
Compare fitments
What do similar vehicles charge for this part?
Acuraspread ±41%
Acura ILX
$305median
$90$340
Acurawide ±69%
Acura MDX
$400median
$199$750
Acuraspread ±33%
Acura RDX
$450median
$450$750
Acurawide ±62%
Acura TLX
$399median
$199$695
Audispread ±33%
Audi A6
$400median
$250$511
Auditight ±18%
Audi Q3
$161median
$136$195
Auditight ±18%
Audi Q5
$444median
$349$511
Audispread ±35%
Audi Q7
$250median
$175$350
BMWspread ±33%
BMW X1
$299median
$250$448
BMWwide ±63%
BMW X3
$250median
$132$449
Chryslerspread ±43%
Chrysler Pacifica
$189median
$95$259
Chrysler
Chrysler Voyager
Price data updating
Common questions
Chrysler 300 torque converter FAQ
How much is a used torque converter for a Chrysler 300?
The median asking price is $250 across 54 priced listings from 4 yards. Grade-A units, the cleanest stock, have a median of $250. 2021 is the cheapest model year we track, with a median of $250.
How much does it cost to replace a Chrysler 300 torque converter?
Using a used part, a Chrysler 300 torque converter replacement typically runs $725–$1,750 all-in: the median used torque converter for this model lists at $250, and independent-shop labor for torque converter replacement typically takes 5–10 hours at $95–$150/hr ($475–$1,500). The labor figure does not include transmission fluid and filter, since the transmission must be removed to access the converter. Labor is a national part-level estimate, not a quote for your vehicle.
Which Chrysler 300 model years does this price guide cover?
This guide currently has year-level pricing for 2021, 2020, 2019, 2017, 2015. Other model years contribute to the overall range where sellers listed them without a year breakdown.
Which Chrysler 300 torque converter years are interchangeable?
Salvage-yard interchange data links Chrysler 300 torque converter fitments across 2014, 2015, 2016, 2019, 2020, 2021. Searching all 6 years widens the pool of units; confirm the part number against your VIN, since trim or drivetrain can split an interchange group.